« previous next »
Pages: [1]   Go Down

Author Topic: Marble Peep sight for survivor stock  (Read 439 times)

0 Members and 1 Guest are viewing this topic.

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Marble Peep sight for survivor stock
« on: May 16, 2010, 03:50:29 AM »
Marble Arms lists a stock-mounted tang peep sight(Quigley style) for the Survivor.....anyone had any experience with this setup? Thinking of trying one for my 45-410...Also, what would be used for front sight in the scenario?
Logged
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: Marble Peep sight for survivor stock
« Reply #1 on: May 16, 2010, 03:59:52 AM »
I can't picture a Marble's on a Survivor stock.  I guess it is possible though as a scope works ok.  IMO you need a hooded front sight to make a tang sight feasible.  I really don't know how you would determine unless it were just experimentation until you got it right? 

Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline HAMMERHEAD

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 508
  • Gender: Male
Re: Marble Peep sight for survivor stock
« Reply #2 on: May 16, 2010, 06:16:07 PM »
It might have the advantage of using the stock front sight, unlike the Williams WGRS receiver sight.
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Marble Peep sight for survivor stock
« Reply #3 on: May 17, 2010, 01:58:33 PM »
I shoot peeps and open front sights, gold bead and blade, as well as globes with various inserts.
Just this last weekend I made hits out to 120+ yards on prairiedog silhouettes with a BSA Martini No.8 (22LR) with a tang peep and gold bead. It works!
A wrist mounted peep, if it will adjust low enough, will allow you to use the stock front sight, unlike mounting the basic Williams in place of the scope rail.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974
Pages: [1]   Go Up
« previous next »