« previous next »
Pages: [1]   Go Down

Author Topic: Need Some 44 Mag Factory Ammo Help  (Read 653 times)

0 Members and 1 Guest are viewing this topic.

Offline rws2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
  • Gender: Male
Need Some 44 Mag Factory Ammo Help
« on: June 16, 2010, 01:40:48 AM »
Hello All! I'm new to this site, joined a couple days ago!
I have ordered a SP1-S44 and it should be here tomorrow. My plans are to use this rifle to deer hunt in Indiana this coming fall.

I have a couple questions about these rifles concerning ammo.

First what do they tend to prefer in factory loads?

Any suggestions on deer hunting loads would be appreciated?

And is ammo from like Buffalo Bore and Cor Bon ok in these rifles or are they too hot for these SP1 framed rifles?

Thanks
Rob
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #1 on: June 16, 2010, 03:50:41 AM »
My .44 Handi (now .445 Super) is on a SB2 frame.  It's an older overbored barrel, but, it always shot Hornady LEs very well.  Now that I'm reloading, I'm not shooting them very often.  I think they'd be safe on a SB1 frame, but Tim or someone will come along and verify that.  I wish they gave us the option of paying extra for SB2 frames; then you'd be good to go with any rifle barrel they make.  I finally have all my rifles on their own SB2 frames.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline schoolmaster

  • Trade Count: (10)
  • Contributor
  • ***
  • Posts: 356
Re: Need Some 44 Mag Factory Ammo Help
« Reply #2 on: June 16, 2010, 04:42:22 AM »
Try the winchester white box 240 grain soft points.
Logged

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: Need Some 44 Mag Factory Ammo Help
« Reply #3 on: June 16, 2010, 05:45:36 AM »
255gr  magtec  is a good factory round

they do just about as good as my handloads at 50yrds,  which is like this....

Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #4 on: June 16, 2010, 06:09:18 AM »
Quote from: rws2 on June 16, 2010, 01:40:48 AM
I have ordered a SP1-S44 and it should be here tomorrow.

Welcome Rob!! Make that an SB1-S44.  ;) BB ammo will be fine, it's still loaded to SAAMI specs, they have this note in their product detail.

Quote
Item 4B is recommended for all STEEL revolvers and rifles on today’s market.

http://www.buffalobore.com/index.php?l=product_detail&p=51

Tim

 
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #5 on: June 16, 2010, 06:40:03 AM »
Win white box 240gr the hornady LE ammo and blazer 240gr all shoot about 2" at 100 yards in mine.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
Re: Need Some 44 Mag Factory Ammo Help
« Reply #6 on: June 16, 2010, 08:00:56 AM »
I also live in Indiana (franklin county) and have used the .44 the past two seasons. My handi really is not too particular about loads. In my area, 100 yd shots are a long one and just about any load will do the job. As stated the WWB 240 grain loads will do just fine. I also tried some 240 grain xtp and they worked ok too. But to be honest some 240 grain lead cast bullets I reloaded worked just as well. I have 7 deer to fall to the handi in the past two seasons. None went over 20 yards. You will love it. Good luck.
Logged

Offline parson48

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 253
Re: Need Some 44 Mag Factory Ammo Help
« Reply #7 on: June 16, 2010, 08:40:29 AM »
Hey, Rob,

I have a 44 but have always hand loaded for it. My response is just to welcome a fellow Hoosier to the boards. I live in Indy.
Logged

Offline rws2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #8 on: June 16, 2010, 10:21:50 AM »
Thanks All! I appreciate it! :)

My bad on the SP when its really SB! :-[

Ahhhh I'm a Hillbilly from West Virginia but my Army buddy lives in Indy, we been runnin together ever since our Army days, some 35yrs now! He comes and hunts WV with me and I hunted Indiana once with him, but didn't see anything on that hunt big enough for me to shoot. Want to try it again and if I get one ok if not ok!

Thanks again All for the replys! :)
Logged

Offline korkskru

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #9 on: June 16, 2010, 05:39:53 PM »
fellow hoosier myself, adams co., i just got my .44 mag handi a couple months ago and love it.  everything i have fed it has been real accurate, considering i have a red dot on mine.  i was impressed with the way it handled a few different loads.  planning on loading up some home brews to see if it gets better... enjoy!  brian
Logged
recession is when your neighbor loses his job, depression is when you lose your job, a recovery is when obama loses his!

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Need Some 44 Mag Factory Ammo Help
« Reply #10 on: June 16, 2010, 05:51:07 PM »
My old 44 shoots pretty good and it ain't too picky about what I feed it. I usually shoot 240gr. bullets of some make or another.
I think it would knock the heck out of a deer. there are some places that sell 300 and 320gr. ammo for 'em... that would be bad medicine for big game.



Spanky
Logged

Offline yukondog

  • GBO Supporter
  • Trade Count: (43)
  • Senior Member
  • *****
  • Posts: 1095
Re: Need Some 44 Mag Factory Ammo Help
« Reply #11 on: June 17, 2010, 05:42:04 AM »
Welcome to the sight rws2, I'v taken 3 deer with mine and used speer 240 gr. gold dot soft point on all but as sayed just about any bullet will do, try several and see what it shoots the best and good luck.
Logged
an unloaded wepon is equal to the same mass and volume as a rock.

Offline rws2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #12 on: June 17, 2010, 02:02:55 PM »
Thanks Everyone! My rifles in but I couldn't go get it as I was in the hayfields all day. Way behind due to the weather. It rained about everyday and now the suns shining so I'm making hay! 18 acres down, 122 Acres to go!

As soon as it rains I'll go get my rifle. I'm personal friends with the gunshop owner and he knows whats up on my end so its no biggie!

Good to hear they don't seem to picky on what you feed them! thanks again! :)
Logged

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Re: Need Some 44 Mag Factory Ammo Help
« Reply #13 on: June 17, 2010, 02:46:01 PM »
You are a man after my own heart...Getting up hay, one of life's simple necessities...
Logged
Pages: [1]   Go Up
« previous next »