Author Topic: speer load data needed  (Read 412 times)

0 Members and 1 Guest are viewing this topic.

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
speer load data needed
« on: July 24, 2010, 03:31:52 PM »
I have a early speer reloading manual from the early 70's and it seems not to have a listing for 105 speer SP in 243 cal. using IMR 4064
any one have a newer edition that may have a powder charge using IMR 4064 and the 105 Gr. speer Hot Core bullet

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: speer load data needed
« Reply #1 on: July 24, 2010, 03:45:05 PM »
speer #12 100/105gr sp, imr4064 30.0gr 2414 muz. vel. - 34.0gr 2650 muz.vel. hope this helps.

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: speer load data needed
« Reply #2 on: July 24, 2010, 03:53:00 PM »
thank you

Offline bobg

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1555
  • Gender: Male
Re: speer load data needed
« Reply #3 on: July 24, 2010, 03:58:04 PM »
My 1964 Speer manual list a min. load for 105gr. sp of 32gr. to a max. load of 36gr.

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: speer load data needed
« Reply #4 on: July 24, 2010, 04:14:12 PM »
I went with 36.5 to day shot excellent funny thing I tried them with IMR 4350 and no matter what charge I used they seem to tumble or Keyhole on paper.
I tried them the other day just to get the new scope on paper and to my surprise using IMR 4064 they did not KeyHole WHY I don't know any one would like to add to the subject?

Offline Autorim

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 610
  • Gender: Male
Re: speer load data needed
« Reply #5 on: July 24, 2010, 04:56:18 PM »
That bullet should not tumble or keyhole in the .243 unless you have a slow twist barrel. What is the twist?

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: speer load data needed
« Reply #6 on: July 25, 2010, 02:41:33 AM »
1 in 10 H@R Handi

Offline Luckyducker

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 645
Re: speer load data needed
« Reply #7 on: July 25, 2010, 04:13:11 AM »
Who knows why a Handi-rifle does what it does.  I had (past tense) a new Handi chambered in 22/250Rem that  shot a 50 grain Rem powr-lokt bullet and 35.6 grains of H-4895 real well and without any pressure issue at all and the next time I shot this load, which was a cooler day, it locked up tighter than a jar of pickles.  I started over with load developement and the d&^% thing would get sticky with loads at starting weights.  I got rid of that thing and never looked back.

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: speer load data needed
« Reply #8 on: July 25, 2010, 05:14:07 AM »
My H&R 22 Hornet keyholes the 55gr loaded with anythng.