« previous next »
Pages: [1]   Go Down

Author Topic: Rexio single shot parts?  (Read 1653 times)

0 Members and 1 Guest are viewing this topic.

Offline jlwilliams

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1321
Rexio single shot parts?
« on: July 13, 2010, 03:35:55 PM »
  I need some small parts for the Rexio single shot 22 (RC22, aka Comanche 22)  Anybody have them or have a lead I may follow to them?  Thanks.
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Rexio single shot parts?
« Reply #1 on: July 13, 2010, 06:16:15 PM »
I am thinking you will probalby have to make them up, not too many of those around for parts.  What parts are broken/missing?  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline jlwilliams

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1321
Re: Rexio single shot parts?
« Reply #2 on: July 14, 2010, 02:36:38 AM »
I need a trigger and hammer.  Transfer bar may be salvagable but if I can find a place that stocks parts I'll get that too. 

  Someone did a 'trigger job' on one to make it more betterer.  I've never seen worse work.  This Bozo should have his file confiscated.  I just want to replace the whole firing system and start fresh.  It did occur to me that I may be cutting and filing but I figure it's worth asking around on the possability that I may be able to buy the parts and save the time.
Logged

Offline Ex 49'er

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1975
  • Gender: Male
Re: Rexio single shot parts?
« Reply #3 on: July 16, 2010, 04:55:18 AM »
You might give this place a holler, they have a large assortment of parts and while they don't list the Rexio; you could get lucky:
http://www.gun-parts.com/index.html/
Logged
When you're walking on eggs; don't hop!!

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: Rexio single shot parts?
« Reply #4 on: July 29, 2010, 07:50:29 AM »
Rexio is imported under the "Comanche" brand and they list all the parts here.
http://www.bersafirearmsusa.com/comanche-firearms/super-comanche.html
BUT-- I've found that listing them doesn't mean they HAVE them. I tried for two years to get a front sight from them and got an eternal song and dance about how "I've asked the manufacturer to send one and they just haven't done it". I asked "can't you take one off a gun in stock and let that gun wait for a new part?" The so called "customer service rep" said "oh we don't have any guns here sir, this is just an office."  I guess their idea of customer service is just answering the telephone. I finally gave up and made one myself. But give it a try, you may have better luck with your parts.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline Kmrere42

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 305
Re: Rexio single shot parts?
« Reply #5 on: August 11, 2010, 08:46:14 AM »
Hi,

I've tried to order a barrel through them.. Always got the run-around from them about it.  Seems that they will only sell it as a direct replacement in order to keep this from being a contender like setup with people putting the latest super-mag into something designed for colt pressures.

What I might do is to send my 45/410 frame to them and see if they would fit a new barrel to it.  I have been wanting a 32h&r for small game, and it would be an excellent piece without the expense of a contender.




Paul,
Logged
Pages: [1]   Go Up
« previous next »