« previous next »
Pages: [1]   Go Down

Author Topic: cleaning brass flasks  (Read 1092 times)

0 Members and 2 Guests are viewing this topic.

Offline jpamp

  • Trade Count: (8)
  • Member
  • *
  • Posts: 71
cleaning brass flasks
« on: August 11, 2010, 08:19:52 AM »
hello i have 2 cva brass flasks that i picked up in a trade but would like to clean them up as they are pretty tarnished on the outside and black and slightly cruddy on the inside.  I know this is for purely cosmetic reasons.  anyone have any suggestions? I tried a little flitz on the outside of one and that seemed to work, but looks like ti will take a bunch of elbow grease.  I was wondering if anyone had any thoughts on disassembling them and putting the parts in my brass tumbler?  these are the tube type flasks where you can take the top and bottom off. 

Thanks,

Logged

Offline Draxx

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 44
Re: cleaning brass flasks
« Reply #1 on: August 11, 2010, 09:55:10 AM »
 You could try soaking it over night in vinegar. That would most likely take off any light corrosion. A tumbler is not a bad idea either.
Logged

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: cleaning brass flasks
« Reply #2 on: August 12, 2010, 06:46:36 AM »
A case tumbler just isn't large enough to allow big items to really tumble, they tend to remain in one place and wear away one side. Personally I like patina on my muzzleloading rifles and accessories but for one of those tubular flasks I'd just polish it with fine steel wool.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline Fingers McGee

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 130
  • Gender: Male
    • Central Ozarks Western Shooters
Re: cleaning brass flasks
« Reply #3 on: August 12, 2010, 07:02:18 PM »
Eagle One Never-Dull.  Can be found at you local wally world.  Bestest stuff I've ever used to clean brass.
Logged
Fingers (Show Me MO smoke) McGee
Man of many Colt's and alter ego of Diabolical Ken
SASS Regulator 28654-L-TG, Rangemaster and stage writer extraordinaire
Pistoleer/Frontiersman, Founding Member - Central Ozarks Western Shooters
Member - Southern Missouri Rangers; Moniteau Creek River Raiders, The Ozark's Posse, Butterfield Trail Cowboys
NRA Endowment Life: NMLRA, GOA; CCRKBA; SAF; SV-115; STORM 327, LASOOS 144, SBSS735

"Cynic:  A blackguard whose faulty vision sees thing as they are, not as they should be."  Ambrose Bierce

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: cleaning brass flasks
« Reply #4 on: August 17, 2010, 06:24:19 PM »
I just use good old Brasso brass cleaner.  Always has performed well. ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline jpamp

  • Trade Count: (8)
  • Member
  • *
  • Posts: 71
Re: cleaning brass flasks
« Reply #5 on: August 18, 2010, 04:20:13 AM »
Thanks guys, the 0000 steel wool and the never dull worked great.
Logged
Pages: [1]   Go Up
« previous next »