« previous next »
Pages: [1]   Go Down

Author Topic: 30/30 bullets in 30-06  (Read 732 times)

0 Members and 1 Guest are viewing this topic.

Offline 3030guy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 113
  • Gender: Male
30/30 bullets in 30-06
« on: September 06, 2010, 12:03:15 PM »
Can you duplicate 30/30 loads in a 30-06? I would like to use the extra 150 and 170 grain 30/30 bullets in my 30/06 and load them under 2000 fps. Anyone try this?
Logged

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: 30/30 bullets in 30-06
« Reply #1 on: September 06, 2010, 01:43:00 PM »
If you search for trail boss loads, some guys are loading the .30-06 with this with some luck.  8)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline 1sourdough

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1003
  • Gender: Male
Re: 30/30 bullets in 30-06
« Reply #2 on: September 06, 2010, 02:14:32 PM »
 Yes you could. I'd try H-4895 and 30-30 bullets at the reduced velocities.
Logged
NRA, Veteran

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: 30/30 bullets in 30-06
« Reply #3 on: September 07, 2010, 05:42:04 AM »
I'm doing this with H-4895 and Rem bullets(22774 CX), the interesting thing is that those loads still cycle through my Rem 742. The recoil is minimal.
Logged
What is the point of Life if you can't have fun.

Offline 3030guy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 113
  • Gender: Male
Re: 30/30 bullets in 30-06
« Reply #4 on: September 07, 2010, 05:51:09 AM »
I see that Hornady lists a load for their 150 grain 30-30 bullet (#3035) with two powders I have on hand, Win 760 (47.9 grains) and IMR 4064 (44.2 grains). Both loads are estimated to shoot 2500fps. I'll let you know how they work out!
Logged

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: 30/30 bullets in 30-06
« Reply #5 on: September 07, 2010, 07:06:58 AM »
If you can get hold of some H4895 you can go as low as 30.6 gr with a 150 gr bullet.
Logged
What is the point of Life if you can't have fun.

Offline critter44

  • Trade Count: (3)
  • Member
  • *
  • Posts: 66
Re: 30/30 bullets in 30-06
« Reply #6 on: September 08, 2010, 03:39:23 AM »
Been there-done that. Works great (I used IMR 4895). Run the velocities on up and they make wonderfully explosive varmint bullets.
Logged

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: 30/30 bullets in 30-06
« Reply #7 on: September 08, 2010, 03:51:06 AM »
My old Speer #10 manual gives reduced load data for 30-06. For the 150 gr SR-4759 start 20.0 grs 1650 fps, Max 24.0 1957 fps

It gives data for 180 gr bullets but you could use it for 170's. IMR 4198 start 26.0 1723 fps max 30.0 2000 fps.
Logged

Offline Range Rider

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 228
  • Gender: Male
  • Have a nice day cowboy
Re: 30/30 bullets in 30-06
« Reply #8 on: September 08, 2010, 05:31:01 AM »
Yes it works.  I shoot a cast bullet from WWs with a gas check.  I size these at .309 and lube with Lyman lube. I use  760 powder under the lead bullet.  The 150 flat nose is running 2200 Fps.  These are bombs on prairie dogs out to 200 yds.
Logged
Range Rider

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
Re: 30/30 bullets in 30-06
« Reply #9 on: September 08, 2010, 06:01:28 AM »
Quote from: 3030guy on September 06, 2010, 12:03:15 PM
Can you duplicate 30/30 loads in a 30-06? I would like to use the extra 150 and 170 grain 30/30 bullets in my 30/06 and load them under 2000 fps. Anyone try this?

Speer lists a couple excellent loads for 150 and 180 gr jacketed bullets that keep the velocities under 2000 fps.  Try 26 - 28 gr of AA5744 under the 150s and 26 - 30 gr 4198 under the 170s.

Larry Gibson
Logged

Offline JoeG52

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 272
Re: 30/30 bullets in 30-06
« Reply #10 on: September 08, 2010, 12:59:00 PM »
Logged

Offline 84Jim

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
  • Gender: Male
Re: 30/30 bullets in 30-06
« Reply #11 on: September 08, 2010, 06:21:07 PM »
I use a -06 reduced load with 150 gr. jacked bullets that I found in an old american rifleman article on reduced loads:  35.0 grs. of 4198 (either IMR or Hodgdon will do).  very accurate.

Jim
Logged

Offline 3030guy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 113
  • Gender: Male
Re: 30/30 bullets in 30-06
« Reply #12 on: September 10, 2010, 03:52:25 AM »
Here's what a 150 grain Sierra 30-30 bullet will do with 42 grains of IMR 3031:

Logged
Pages: [1]   Go Up
« previous next »