« previous next »
Pages: [1]   Go Down

Author Topic: new buffalo classic owner!!!!  (Read 508 times)

0 Members and 1 Guest are viewing this topic.

Offline andrewtheelder38

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
new buffalo classic owner!!!!
« on: September 20, 2010, 03:16:00 PM »
I went to a local gunshow this past weekend and acquired a brand new Buffalo Classic 45-70...have wanted one for like 15 years.....I think I will use it for deer hunting this year here in Maine, but now i need some good loads for it. I have 350grain JHP bullets, 385 grain cast, 405 grain cast and a few 405 grain jacketed soft points. I usually use sr4759, Imr 3031 or Imr 4320 for powder.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: new buffalo classic owner!!!!
« Reply #1 on: September 20, 2010, 03:21:44 PM »
Congrats, everyone needs a 45-70 and the BC is icing on the cake!!  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: new buffalo classic owner!!!!
« Reply #2 on: September 20, 2010, 03:23:37 PM »
Welcome and congrats on your purchase!  I just took a deer with my .45-70 BC.  My goto loads right now are 46.7 gr. Reloader7 and a 325gr. Hornady Interlock HP or a 325 gr. FTX bullet.  I'm sure the 350 you have would be good on deer and such.  The bigger bullets might have to be seated deeper than standard depending on the throat you have.  Mine can barely take the 325 interlock without seating past the cannelure.  A lot of the guys here rent a reamer and had ream them back about 1/4" to be able to use the bigger bullets.  I intend to, but don't want to mess something up so haven't done it yet.  I don't use any other powder with it now, so don't know about your powder choices listed, but the Reloader7 is about 7 bucks cheaper a pound here and burns VERY clean in these long barrels.  Might be something for you to try out if you get the desire.  I have down loaded to trap door levels using 34.3 gr. RL7 and gone as high as 52 gr. which has a pretty stiff punch.  I get great accuracy though from my 46.7 gr. loads and plenty of power.  8)  Good luck.
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline andrewtheelder38

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
Re: new buffalo classic owner!!!!
« Reply #3 on: September 20, 2010, 03:29:23 PM »
ha ha ha ha Tim, I forgot to tell you that I have 4 other Handi Rifles in 45-70, one synthetic scoped, and one whitetails limited one with checkered stocks and 2 other regular pallet wood stocked beatuies....so this is 45-70 number 5!....it is a sickness.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: new buffalo classic owner!!!!
« Reply #4 on: September 20, 2010, 03:34:26 PM »
Ha ha ha ha ha, I have six of em, all H&Rs, 3 BCs if I include the 45-120!!

A fella can't have too many 45-70s!!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline onthefarm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
  • Gender: Male
Re: new buffalo classic owner!!!!
« Reply #5 on: September 20, 2010, 03:45:58 PM »
I just picked up my first one today!  A regular SB2.  I haven't even cleaned it yet.
Logged
Handi 25-06, 45-70, 22 Hornet, Ultra slug 12g, H&R20ga, Lyman GPR .50, Trad Tracker 209 .50, Marlin XLR 30-30, 10/22's, MK III.....

Offline andrewtheelder38

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
Re: new buffalo classic owner!!!!
« Reply #6 on: September 21, 2010, 03:40:41 PM »
Well get going man!....Them there things come in dirty right from the factory and the bores always need a good scrubbing !
Logged
Pages: [1]   Go Up
« previous next »