« previous next »
Pages: [1]   Go Down

Author Topic: Vaquero Modification  (Read 1308 times)

0 Members and 1 Guest are viewing this topic.

Offline alacharger

  • Trade Count: (5)
  • Member
  • *
  • Posts: 90
Vaquero Modification
« on: January 21, 2011, 04:03:29 AM »
I dropped a pair of Super Blackhawk hammers into my matched pair of .44-40 Vaqueros a night or two ago.  If you like to shoot one handed, I'd highly recommend the modification.  It's cheap, parts are drop in fits, and they make pulling that hammer back one handed so much easier. :)
Logged
Approach every man with a smile on your face and homicide in your heart. 

D.A. "Jelly" Bryce

Offline Hit or Miss

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 362
  • Gender: Male
Re: Vaquero Modification
« Reply #1 on: January 21, 2011, 02:09:44 PM »
You can't just come in here and say that without posting pics! ;D
Logged
Which lie got to you so that you refuse Him???

Offline alacharger

  • Trade Count: (5)
  • Member
  • *
  • Posts: 90
Re: Vaquero Modification
« Reply #2 on: January 21, 2011, 03:42:31 PM »
I'm sorry...that was rude of me :)


Top gun has a Super Blackhawk hammer.  Bottom gun has standard Vaquero hammer.


Left gun has a Super Blackhawk hammer.  Right gun has standard Vaquero hammer.


Overhead shot of Super Blackhawk hammer. 
Logged
Approach every man with a smile on your face and homicide in your heart. 

D.A. "Jelly" Bryce

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Vaquero Modification
« Reply #3 on: January 21, 2011, 05:28:17 PM »
Nice!
Being a newcomer to Rugers:
This is for the 'old' model Vac., not the NMBH/Vac. series, right?
How about the Montado hammer into the NMs, should be similar to what you have done here?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline alacharger

  • Trade Count: (5)
  • Member
  • *
  • Posts: 90
Re: Vaquero Modification
« Reply #4 on: January 22, 2011, 12:30:18 AM »
Quote from: gcrank1 on January 21, 2011, 05:28:17 PM
Nice!
Being a newcomer to Rugers:
This is for the 'old' model Vac., not the NMBH/Vac. series, right?
How about the Montado hammer into the NMs, should be similar to what you have done here?

The pictured guns are "old" Vaqueros...the large framed ones.  The ones with the Eagle checkered Gunfighter grips are .44-40s (non-consecutive pair).  The ones with the elk stag grips are .45 Colt (again, non-consecutive pair)

I have converted a set of the New Vaqueros.  I bought a consecutive set of Montados with 3 1/2" barrels when they first came out, and liked them.  Now I've gone back and put Super Blackhawk hammers in the consecutive set of KNV (Stainless New Vaqueros) revolvers I've had since they came onto the market. 

That makes a total of four guns I've converted...two New Models and two "old" models.  The Montado hammers are checkered, where the SBH hammers are grooved...otherwise they appear pretty much the same. 
Logged
Approach every man with a smile on your face and homicide in your heart. 

D.A. "Jelly" Bryce

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Vaquero Modification
« Reply #5 on: January 22, 2011, 04:15:43 AM »
Interesting.......I'm liking this idea.
Now, where do I get either hammer and how much?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline alacharger

  • Trade Count: (5)
  • Member
  • *
  • Posts: 90
Re: Vaquero Modification
« Reply #6 on: January 22, 2011, 05:15:05 AM »
At this time, the Montado hammers are available from Ruger only...and I think they are back ordered.  The SBH hammers are available from Brownells and Midway for around $30.00 plus shipping.

http://www.brownells.com/.aspx/sid=28153/pid=24005/Product/SUPER_BLACKHAWK_HAMMER_ASSY__SS

http://www.midwayusa.com/viewproduct/?productnumber=841361

Brownell's says "Hammer, only"...but don't let that fool you.  It's the complete hammer assembly, including the hammer plunger, plunger spring and plunger cross pin.
Logged
Approach every man with a smile on your face and homicide in your heart. 

D.A. "Jelly" Bryce
Pages: [1]   Go Up
« previous next »