Author Topic: 1860 Army pistol question  (Read 1408 times)

0 Members and 1 Guest are viewing this topic.

Offline Jax

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
  • Gender: Male
1860 Army pistol question
« on: September 14, 2010, 07:20:11 AM »
Im new to the hobby, well kinda since I have a BP cannon.  I just purchased this pistol from an estate sale in good condition.  It didnt come with instructions or anything.  I pretty much knokw how to load it, BUT would like to know how much BP you guys use in yours??  I got #11 caps, felt wad, and balls. 

From what I have seen and read the way to load is, BP (30 gr is what I have seen being used) felt pad, ball, ram, add cap. 

Thanks for the help.  Im pretty excited to get to shoot it.  I also got a 58 cal musket with it, and am having issues finding ammo for it local.  will have to order online

--Justin
Justin

Offline oldandslow

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3962
Re: 1860 Army pistol question
« Reply #1 on: September 14, 2010, 12:56:34 PM »
My favorite plinking load with the 1860 is 23 gr. of 3f or Pyrodex P. I add corn meal to where the ball seats slightly below the cylinder face. Mild recoil and more accurate than I am with those little dinky sights on the 1860. I use mostly Pyrodex since real black powder can't be found around here. My stash of Goex is almost gone.

Offline Jax

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
  • Gender: Male
Re: 1860 Army pistol question
« Reply #2 on: September 14, 2010, 02:31:44 PM »
Thanks for the reply.  I have ff real Black powder, Do you think 30 grains would be too much to start with, or should I start with a bit lower just to test things?
Justin

Offline simonkenton

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 739
Re: 1860 Army pistol question
« Reply #3 on: September 14, 2010, 04:42:24 PM »
Thirty grains of BP works great for me.
Aim small don't miss.

Offline FourBee

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1770
  • Gender: Male
Re: 1860 Army pistol question
« Reply #4 on: September 14, 2010, 06:27:04 PM »
Jax; 30 gr of 2f will be fine.  If you notice any unburnt powder, cut it back a few grains.    3f supposedly burns faster giving more power from the short barrels, but who can tell the difference ?   Usually 23gr to 25gr is the best all round.  You not only get better accuracy, it'll get a few extra shots out of a pound of powder. 
Enjoy your rights to keep and bear arms.

Offline Jax

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
  • Gender: Male
Re: 1860 Army pistol question
« Reply #5 on: September 15, 2010, 01:31:29 PM »
Thanks for the info guys.  I will be shooting it next weekend.  I just found some nice little funnels at walmart that will help me pour the BP in the gun. 
Justin

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: 1860 Army pistol question
« Reply #6 on: September 21, 2010, 03:41:43 PM »
If the funnels are plastic, they will need to have their static electricity charge removed prior to use, or powder granules will cling to it.

Just dip the funnel into any liquid dish detergent, and let it drip dry before use.

.
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: 1860 Army pistol question
« Reply #7 on: September 21, 2010, 03:54:00 PM »
I save once used drier sheets and rub them down.  Does a nice job on my electronic scale and powder dippers too.  ;)
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline Jax

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
  • Gender: Male
Re: 1860 Army pistol question
« Reply #8 on: September 28, 2010, 04:24:39 PM »
I shot this pistol this past weekend, and I love it.  I have to get use to the caps falling off after fire.  Had one misfire.  Took 2 strikes with the hammer to fire round.    30gr was a bit much as there was a bit of unburnt powder.  Took it down to 25 gr and it works perfect. 

The last question.  When firing, after it goes off, whats the proper procedure to get rid of the caps?? 
Justin

Offline FourBee

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1770
  • Gender: Male
Re: 1860 Army pistol question
« Reply #9 on: September 28, 2010, 06:36:01 PM »
Quote
The last question.  When firing, after it goes off, whats the proper procedure to get rid of the caps?? 


Have you ever watched those old 'B' western cowboy movies where in the heat of a gun fight those old cowpokes fired a shot and flicked their guns high in the air as they cocked them for another shot?  Well; that's one way of doing it.  But some range rules don't allow that type of shooting, so a flick to the right with the barrel pointed down range while cocking will throw the spent cap free of the cylinder.   I like the old cowpoke style myself .  ;D :D
Happy Shootin........ 8)
Enjoy your rights to keep and bear arms.