« previous next »
Pages: [1]   Go Down

Author Topic: Converting to muzzleloader  (Read 878 times)

0 Members and 1 Guest are viewing this topic.

Offline Forestclimber

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 706
Converting to muzzleloader
« on: September 27, 2010, 06:03:43 AM »
I was wondering if anyone ever took an H&R high powered rifle and had it rebored to a muzzleloader with a breechplug that uses 209 caps.  I think you could make a nice scoped roundball shooting barrel.  I know there are people that rebore shot out muzzleloader barrels.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Converting to muzzleloader
« Reply #1 on: September 27, 2010, 12:38:01 PM »
There is one GBO member with a 45/70 barrel that has a 209 breech plug installed.  I believe it is a modified Encore plug.  Last post I read it was shooting round balls nicely for him.  The bore still has the original rifling.  If you search in the H&R Centerfire forum you should be able to find the threads on it.  Below is a link to his latest post.

BB

http://www.gboreloaded.com/forums/index.php/topic,216645.0.html
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline gjdykeman

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 210
  • Gender: Male
Re: Converting to muzzleloader
« Reply #2 on: October 19, 2010, 04:32:54 PM »
A little bit of an update on this. 20g was too much powder, i use 14g Unique now. High pressure loads, W296 and others cratered the receiver. 209 laying on the face of the receiver with high pressure loads is no good. Lessons learned. Black powder works fine but fowled terrible. Twist rate. A 25 acp conversion may solve this but not in the budget. Some time in the future maybe. Good for now. Low pressure load and accurate with round balls. Very slow.
Logged
SFC US Army 32y 8m 13d RET
Pages: [1]   Go Up
« previous next »