« previous next »
Pages: [1]   Go Down

Author Topic: Large lever loop on Henry 22?  (Read 2698 times)

0 Members and 1 Guest are viewing this topic.

Offline Stape

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 138
Large lever loop on Henry 22?
« on: January 14, 2010, 02:32:16 AM »
How hard is it to install a large lever loop on a Henry 22lr lever gun?

Thanks
Logged

Offline Old Grizz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 387
  • Gender: Male
Re: Large lever loop on Henry 22?
« Reply #1 on: January 14, 2010, 03:57:34 AM »
Take the lever screw out then pull out the old lever. Line up the large lop lever and reinstall the screw.
Logged
Marlin 1895G Rules
45-70
Member Team Hornady
Life Member NRA
Member NAHC

Offline Stape

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 138
Re: Large lever loop on Henry 22?
« Reply #2 on: January 14, 2010, 04:01:32 AM »
  Sounds easy enough, just didn't know if I'd have springs and such popping out or something crazy.  Better to ask.  Thanks for the info.
Logged

Offline Old Grizz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 387
  • Gender: Male
Re: Large lever loop on Henry 22?
« Reply #3 on: January 14, 2010, 04:13:36 AM »
Nope, no springs or little parts to worry about. Just make sure you get the lever lined up in the bolt before you try to reinstall the screw. It's pretty easy. Good luck.
Logged
Marlin 1895G Rules
45-70
Member Team Hornady
Life Member NRA
Member NAHC

Offline chicky77

  • Trade Count: (0)
  • Posts: 2
Re: Large lever loop on Henry 22?
« Reply #4 on: September 24, 2010, 08:27:42 AM »
There is no "screw" that holds the lever on, but a hinge pin under the receiver cover. you will have to sneak the lever out and around the locking bolt but  is easy to do.
Logged
Pages: [1]   Go Up
« previous next »