« previous next »
Pages: [1]   Go Down

Author Topic: New .357 Maximum Pressure Data  (Read 447 times)

0 Members and 1 Guest are viewing this topic.

Offline steve@357maximum.com

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
New .357 Maximum Pressure Data
« on: October 30, 2010, 02:23:19 PM »
I just wanted to let .357 Max shooters know that I received my pressure test results from recent testing and the data is now posted on my website, http://357maximum.com/accurate-powder-pressure-data/
These loads all use A1680 powder and list safe charges that are above currently published Accurate Powder manuals.  Steve
Logged

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: New .357 Maximum Pressure Data
« Reply #1 on: October 30, 2010, 02:45:11 PM »
 If you don't have perfect timing? I picked a bottle of AA1680 and set up my press lastnight ;D Thanks for the update.

http://357maximum.com/accurate-1680-pressure-data/

Lonny
Logged

Offline dave29

  • GBO Supporter
  • Trade Count: (93)
  • Senior Member
  • *****
  • Posts: 1256
Re: New .357 Maximum Pressure Data
« Reply #2 on: October 31, 2010, 04:41:38 AM »
Thanks for the info Steve. I added the bookmark.  :)
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: New .357 Maximum Pressure Data
« Reply #3 on: October 31, 2010, 05:42:59 AM »
Thanks for the update Steve!!  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: New .357 Maximum Pressure Data
« Reply #4 on: October 31, 2010, 05:48:41 AM »
If I open Steve's link it will probably cost me $100 because my 357 Max is still on a cast iron frame. :P 

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: New .357 Maximum Pressure Data
« Reply #5 on: October 31, 2010, 06:37:22 AM »
Quote from: bikerbeans on October 31, 2010, 05:48:41 AM
If I open Steve's link it will probably cost me $100 because my 357 Max is still on a cast iron frame. :P 

BB

Why would you need to change frames?
 Quick posted this in an earlier post. "breech force of a 45kpsi load is safe in the SB1"
http://www.gboreloaded.com/forums/index.php/topic,213112.msg1099142060.html#msg1099142060

Lonny
Logged

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: New .357 Maximum Pressure Data
« Reply #6 on: October 31, 2010, 06:38:00 AM »
Thanks for adding the information to your website Steve. And thanks to Johan for going the extra mile once again. He has helped me out more than once with load data questions for the .357 MAX using Ramshot Enforcer. Since I now have some A1680 in my powder cabinet I will be doing some more loading. :D


Bill
Logged
Pages: [1]   Go Up
« previous next »