« previous next »
Pages: [1]   Go Down

Author Topic: Using wads in reduced 45-70 and 458 Win loads  (Read 528 times)

0 Members and 1 Guest are viewing this topic.

Offline tacotime

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 279
Using wads in reduced 45-70 and 458 Win loads
« on: November 11, 2010, 04:50:21 AM »
Can you guys enlighten me on when and how to use wads or packing with reduced loads, for primarily 458 Win. Mag with 405 and 500 grain bullets?  Talking about the reduced loads in 458 that run around 1600 fps or so.  Thanks!
Logged

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Using wads in reduced 45-70 and 458 Win loads
« Reply #1 on: November 11, 2010, 10:35:44 AM »
Tt

Heres a Vid link for U-tube that will help explain this better than I can type it , should be a good place to start .

stimpy

 http://www.youtube.com/watch?v=Wv49KJLWPH8&feature=channel
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: Using wads in reduced 45-70 and 458 Win loads
« Reply #2 on: November 11, 2010, 03:18:28 PM »
Get you some Accurate 5744 powder and for get wads. This stuff will shoot the same no matter where the powder is positioned. It is special made for reduced loads in those big cases. I use 28 grs in a 45-70 with 405 cast bullets for around 1400 fps from a 28" barrel and it is very accurate.
Logged

Offline tacotime

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 279
Re: Using wads in reduced 45-70 and 458 Win loads
« Reply #3 on: November 15, 2010, 04:46:19 AM »
Thanks!
Logged
Pages: [1]   Go Up
« previous next »