« previous next »
Pages: [1]   Go Down

Author Topic: 308 + cast bullets  (Read 1091 times)

0 Members and 1 Guest are viewing this topic.

Offline rockrat

  • Trade Count: (25)
  • Avid Poster
  • **
  • Posts: 192
308 + cast bullets
« on: December 10, 2010, 02:34:50 AM »
Took my rifle to the range yesterday with some cast bullet loads, hoping for a bit of luck.   The rifle is comprised of a 308 barrel bought from this site and one of the Remington made guns, was origionally one of the thumbhole stocked guns in 45-70.  The 308 barrel would never lock up on the other receivers, too tight, and all the barrels I have were too loose on this action, so put the 308 barrel on and locked up great.

Tried "the load" of 13 gr Red dot and not too bad with the Lyman 311284 bullet, but yesterday was using 4759 instead.  Top target is a bullet from a Lee group buy mould, about 190 gr., velocity 1850 fps.  Second target was the 311284 bullet @1758fps.   The "flyers" were called pulls.  fingers kind of numb from the cold and I was in a hurry to get warm.  Knew it when the trigger broke that it would be out of the group.   This thing looks like it really wants to shoot.

five shots


six shots
Logged
Its not that Life is too short, its that Death is too long!!

Offline Troyboy

  • GBO Supporter
  • Trade Count: (41)
  • Senior Member
  • *****
  • Posts: 1220
  • Gender: Male
  • Work more talk less
Re: 308 + cast bullets
« Reply #1 on: December 10, 2010, 12:18:36 PM »
that looks good. Been thinking about using more lead myself
Logged
.204 .22lr .22wm .25acp .223 5.56 .243 .25-06 6.5x55  .308  .300wbymag  7.5x54  7.62x25 7.62x39  338-06  9x19 .38spl  9x18 .45acp . 45-70 .500s&w 12rfl 12smb 20smb  .45lc 410smb .22hornet .280AI    Ask not what your country can do for you BUT what can YOU do for your country

Offline geezer56

  • GBO Supporter
  • Trade Count: (102)
  • Contributor
  • *****
  • Posts: 446
Re: 308 + cast bullets
« Reply #2 on: December 10, 2010, 12:38:40 PM »
I have a short barrel 308 that loves the 311440.  Seat them out to just touch the lands, 5744 powder, and she shoots really well.  I don't have my load notes, so I don't remember the charge.  Haven't got to pop bambi with it, but it vaporizes water bottles and the like.  The flat pointed bullet just looks like it wants to thump something, and the 308 is turning out to be a great cast bullet caliber. 
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 308 + cast bullets
« Reply #3 on: December 10, 2010, 01:12:55 PM »
Mostly cast bullets is what Ive been shooting for years now; I really like them. Make sure you clean the jacketed fouling out before using them though and it should get even better.
BTW, that load is about what the original 30-30 was. T. Roosevelt thought it a "fine smallbore express" and used it to good effect in Africa on smaller game. It will do the same today in a .308 or 30-06 case.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline rockrat

  • Trade Count: (25)
  • Avid Poster
  • **
  • Posts: 192
Re: 308 + cast bullets
« Reply #4 on: December 12, 2010, 03:36:40 PM »
Yup, scrubbed the copper out first, SOP.   I have one of the 311440 moulds too, plan on working with that also, and the Ranch Dog 311-115.   Thanks, will also try some 5744 too.
Logged
Its not that Life is too short, its that Death is too long!!

Offline gomerdog

  • Trade Count: (17)
  • Contributor
  • ***
  • Posts: 397
Re: 308 + cast bullets
« Reply #5 on: December 12, 2010, 05:25:10 PM »
How far were you shooting?
Logged
"Endeavor to persevere..." Chief Dan George from The Outlaw Josie Wales
Pages: [1]   Go Up
« previous next »