« previous next »
Pages: [1]   Go Down

Author Topic: .223 twist rate  (Read 806 times)

0 Members and 1 Guest are viewing this topic.

Offline bwcweld

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
.223 twist rate
« on: January 28, 2011, 03:44:12 AM »
was wondering if there was a way to tell twist rate on these rifles by using serial number or something.  or should i just compare it to my 22-250 with a 1 in 12 twist?
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: .223 twist rate
« Reply #1 on: January 28, 2011, 04:21:04 AM »
Mine's a new one with the checkered synthetic stock and a CBA serial number and is one in nine.  See the twist rates in the FAQs, and how to measure it.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline PA-Joe

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 980
Re: .223 twist rate
« Reply #2 on: January 28, 2011, 05:07:32 AM »
I have seen 223s in 1/6 1/7 1/9 1/12 1/14.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .223 twist rate
« Reply #3 on: January 28, 2011, 05:15:52 AM »
Older H&R 223s are 1:12, newer than 2005 will be 1:9 or :1:12", 2007 and later are all 1:9", see the FAQs twist rate list and instructions to check yours, that's the only way to know for sure, H&R has no record of what twist they used during the transition years. If it's an extractor, it's likely a 1:9", but not necessarily because they switched back and forth for a while.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »