« previous next »
Pages: [1]   Go Down

Author Topic: dented lips on fired casings  (Read 758 times)

0 Members and 1 Guest are viewing this topic.

Offline montveil

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 343
  • Gender: Male
dented lips on fired casings
« on: March 16, 2011, 10:28:04 AM »
I have been shooting 230 grain fmj steel case Blazers in my  1911 clone 45.
It fires reliably but I noticed some of the spent steel casings have the leading edge with a small crimp in their leading edges.
Most of the ejected shells are thrown back to my rear at a 45 degree angle.
Do I have a problem or just keep shooting?
Can't say what brass casings do as I have not fired any lately
__________________
Logged
MONTVEIL IN THE NC MOUNTAINS

Offline stubshaft

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 489
  • ROA's Rule
Re: dented lips on fired casings
« Reply #1 on: March 16, 2011, 11:13:22 AM »
Just keep blazing away.
Logged
If I agreed with you then we would both be wrong.

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: dented lips on fired casings
« Reply #2 on: March 16, 2011, 03:39:01 PM »
The case mouth is hitting the ejection port. Most modern 1911 clones have the ejection port opened to prevent this. The Blazer cases are aluminum and are easily deformed. If your gun is functioning properly, I wouldn't sweat the dings.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline montveil

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 343
  • Gender: Male
Re: dented lips on fired casings
« Reply #3 on: March 17, 2011, 05:35:30 AM »
Thanks folks, I'm glad to hear that I don't hear I have a firearm malfunction. I'll clean the extractor and ejector to remove the possibility of laziness on their part
Logged
MONTVEIL IN THE NC MOUNTAINS

Offline Guntrainer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: dented lips on fired casings
« Reply #4 on: March 18, 2011, 04:59:18 PM »
If you don't reload, don't sweat it. If you do, the ejector can be tuned or replaced. No biggie.  ;)
Logged
Pages: [1]   Go Up
« previous next »