« previous next »
Pages: [1]   Go Down

Author Topic: Quarter scale parts for the No.1 Field Carriage  (Read 827 times)

0 Members and 1 Guest are viewing this topic.

Offline Rotunda

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
Quarter scale parts for the No.1 Field Carriage
« on: January 17, 2011, 11:25:33 AM »
Does anyone know of a Company producing quarter scale parts for the No.1 Field Carriage?
I am trying to build one for a 3 inch Parrott gun. 
I can make most of the parts but I need an Elevating Screw and Screw Box.

Regards,
Tony
Logged

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: Quarter scale parts for the No.1 Field Carriage
« Reply #1 on: January 22, 2011, 12:32:08 PM »
Rotunda,
If none of the forum sponsors have contacted you, here are a few outfits that make reduced scale carriages, but I don't know if any of them work in quarter scale. As I recall, you got drawings from AOP; wouldn't it be less expensive to have a machine shop there make an elevation screw from a scaled down drawing, than to have an American manufacturer make one for you (along with the added cost of shipping)?

I'm fairly sure that all of these are listed in the stickies.

Neff Cannons
http://www.neffcannons.com/wiki/index.php/Main_Page

Jefferson Armory
http://www.hatpeople.com/peter/Index.html

Schneider Enterprises - Scale Model Cannons, Gatling Guns
http://www2.wi.net/~schneiderent/%60schneiderent/new_page_18.htm

Logged
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline Rotunda

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
Re: Quarter scale parts for the No.1 Field Carriage
« Reply #2 on: January 24, 2011, 10:51:53 AM »
Hi Boom  J,

Thanks for finding the stickies. I hadn’t seen those sites on the board.
I was hoping that there might be someone out there already tooled up and producing quarter scale parts such as Elevating Screws  and Screw Boxes.

To get a machine shop to make one off’s to quarter scale over here would cost about double the price of the full size one’s in the States .
Logged

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: Quarter scale parts for the No.1 Field Carriage
« Reply #3 on: February 06, 2011, 10:27:06 AM »
Tony,
The other day I came across this company that produces quarter scale U.S. Napoleons (2nd item down); they might be willing to make an elevation screw for you.

http://www.hartfordarmory.com/johnfitch.htm

http://www.griffinhowe.com/store/view-det.cfm?id=151600

Contact Hartford Armory 
If you would like more information please e-mail us by clicking the link below. Please be sure to include your contact information such as an address, phone number, or alternate information so that we will be able to answer your inquiry.
Contact Hartford Armory:
hartfordarmory@msn.com
Telephone: (860) 585-8610
100-B Main St.
Collinsville, CT 06019-3133 
Logged
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.
Pages: [1]   Go Up
« previous next »