« previous next »
Pages: [1]   Go Down

Author Topic: 223 Rem., 24" Bull barrel on a SB2 Receiver?  (Read 447 times)

0 Members and 1 Guest are viewing this topic.

Offline fbates

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
223 Rem., 24" Bull barrel on a SB2 Receiver?
« on: March 08, 2011, 10:46:15 AM »
Can i put a 223 Rem., 24" Bull barrel pn: 823 on a SB2 Receiver?  it's listed under the ultra rifle page on H&R website.  they state:

All model SB2 Handi-Rifles™ can be fitted with the rifle barrels listed below, as well as with shotgun barrels previously listed. Model SB1-Pardner® shotguns cannot be fitted with any rifle barrels. All barrels are blue finish only.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: 223 Rem., 24" Bull barrel on a SB2 Receiver?
« Reply #1 on: March 08, 2011, 11:13:53 AM »
Yes, the 223 24" bull can be fit and should only be fitted to a SB2 receiver.  See the FAQs regarding barrel fitting.  Also, depending on the year of manufacture of your SB2, H&R may or may not fit this barrel  to your SB2 receiver.  All this and more in the FAQs.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Lost Oki

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 182
Re: 223 Rem., 24" Bull barrel on a SB2 Receiver?
« Reply #2 on: March 08, 2011, 01:43:22 PM »
As stated, yes the 24" bull will fit, had one installed on my SB2 about 4 years ago.  It will weigh in around 8 lbs without a scope.  Mine has been extremely accurate with reloads, right at 1" with factory. 
Logged
Pages: [1]   Go Up
« previous next »