« previous next »
Pages: [1]   Go Down

Author Topic: Ring Height  (Read 378 times)

0 Members and 1 Guest are viewing this topic.

Offline str8shooter48

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 353
Ring Height
« on: December 23, 2003, 01:42:10 PM »
I have an Encore 209x50. Right now I have a Weaver base and a set of Weaver medium height rings attached to a Bushnell 1.75-4x32. I want to upgrade the scope to something like a 3x9x40 Nikon Monarch or a Sightron SII 3x9x42. Will I be able to stick with medium height rings using a scope with a 42 mm objective lens. The rear sight is not a concern as it has already been removed. Any advice would be appreciated.

Thanks
Logged

Offline Ranger413

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 358
Ring Height
« Reply #1 on: December 23, 2003, 05:32:41 PM »
I have the Warne Maxima base and medium height QD rings on my 209X50.  I have about 1/16" to spare between the objective of my scope and the rear sight.  My scope is a Bushnell Elite 3200 3-9X40mm.  You should have ample room without the rear sight in place.

Ranger413
Logged
Life is like a dogsled team, if you ain't the lead dog the scenery never changes.

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Ring Height
« Reply #2 on: December 23, 2003, 05:40:02 PM »
I used to have a Leupold Vari-X II with a 40mm lens on mine with a Weaver Base and Medium Burris Rings.  Seems there was about an 1/8" or more clearance, you should be fine.
Logged
Pages: [1]   Go Up
« previous next »