« previous next »
Pages: [1]   Go Down

Author Topic: throat reamer for .45-70 buffalo classic  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

Offline craveman85

  • Trade Count: (0)
  • Posts: 4
throat reamer for .45-70 buffalo classic
« on: March 28, 2011, 02:31:32 AM »
i was thinking of buying a reamer to redo the throat in my buffalo classic.  its got approximately a 24 degree leade angle on it and just destroys cast boolits.  i refuse to shoot jacketed bullets out of this rifle.  i was thinking of the manson precision 513-053-450 reamer.  anyone used this before.  i would have to put the pilot on my lathe and turn it down though because my bore diameter is .446 and it comes with a .449 pilot. 
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: throat reamer for .45-70 buffalo classic
« Reply #1 on: March 28, 2011, 05:12:44 AM »
Cant you get a reamer with the changable pilots and the angle you want?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline craveman85

  • Trade Count: (0)
  • Posts: 4
Re: throat reamer for .45-70 buffalo classic
« Reply #2 on: March 28, 2011, 06:39:50 AM »
not sure.  i havent really looked too much. yet.
Logged

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
Re: throat reamer for .45-70 buffalo classic
« Reply #3 on: March 28, 2011, 06:52:16 AM »
Try 4-D:

Reamers@4-dproducts.com

406-752-2520
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: throat reamer for .45-70 buffalo classic
« Reply #4 on: March 28, 2011, 07:06:21 AM »
I used Fred's reamer, worked great on three of my 45-70 barrels, I've only use jacketed bullets tho.  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,100524.msg1098265499.html#msg1098265499
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: throat reamer for .45-70 buffalo classic
« Reply #5 on: March 28, 2011, 11:32:38 AM »
I dont think you would be turning a pilot on a hardened reamer anyway, it would have to be ground, and that very true.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974
Pages: [1]   Go Up
« previous next »