« previous next »
Pages: [1]   Go Down

Author Topic: 10 ga barrel...help  (Read 670 times)

0 Members and 1 Guest are viewing this topic.

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
10 ga barrel...help
« on: April 03, 2011, 03:33:39 AM »
i picked up a sb 10 ga barrel but the extracter lug has been cut off. how do i go about getting a new one re-installed?
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 10 ga barrel...help
« Reply #1 on: April 03, 2011, 05:30:17 AM »
See the FAQs  ;)
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel...help
« Reply #2 on: April 03, 2011, 06:24:06 AM »
You'll have to order parts from H&R, toll free (866)776-9292, no one else carries the 10ga ejector, as gcrank said, see the FAQs for instructions.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
Re: 10 ga barrel...help
« Reply #3 on: April 03, 2011, 03:58:29 PM »
its actually the whole underlug thats gone. and i couldnt find anything on faq
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel...help
« Reply #4 on: April 03, 2011, 04:14:35 PM »
You're SOL unless someone has a barrel they want to sell and someone that can safely cut it off and weld in on, no one makes underlugs, although they have been made before, very expensive machine work, might as well spend the money on an accessory barrel or a used 10ga. Be aware the 10ga requires a different frame than other shotgun barrels, it won't fit an SB1 or SB2 rifle frame, so unless you have an SB2 shotgun frame, you'll need that too.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
Re: 10 ga barrel...help
« Reply #5 on: April 03, 2011, 04:44:39 PM »
do you know what kind of welding is required? im a welder by trade but have never dealt with guns in such a manner and it seems a little more refined than what i may be used to.
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel...help
« Reply #6 on: April 03, 2011, 05:58:12 PM »
My gunsmith was going to weld an underlug from a donor rifle barrel to a Shilen barrel blank for me, but he decided it wasn't going to be an easy job making sure it was aligned properly, too much work making an alignment fixture I think, so he ended up doing a stub with the donor instead, so being able to weld doesn't necessarily mean it's easy.  :-\

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 10 ga barrel...help
« Reply #7 on: April 04, 2011, 10:17:49 AM »
Sounds like you got quite a tomato stake there............ :(; wonder if somebody thought they could weld that underlug onto something else and ended up with two pieces of......., well, less than needed.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
Re: 10 ga barrel...help
« Reply #8 on: April 04, 2011, 04:12:32 PM »
does anyone know by what process and means in which they attach these lugs and what grade of steel that they fabbed from? Also wondering with standard style welding, what the results of heat damage may occur?  nothing is definite, there s always a way
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: 10 ga barrel...help
« Reply #9 on: April 05, 2011, 09:54:38 AM »
I bought an older 20 ga H&R barrel with the snap on fore stock.  The underlug on that barrel was brazed instead of welded.  Anybody think brazing would work on the 10 ga?

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel...help
« Reply #10 on: April 05, 2011, 10:12:17 AM »
Should work fine as long as alignment can be achieved and maintained.  ;)

Tim

http://www.leverguns.com/articles/saami_pressures.htm
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »