« previous next »
Pages: [1]   Go Down

Author Topic: .257 Roberts casing question....  (Read 331 times)

0 Members and 1 Guest are viewing this topic.

Offline Ron/Pa.

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 159
.257 Roberts casing question....
« on: April 13, 2011, 04:46:21 PM »
   Haven`t reloaded for years. I have around 40 winchester + P casings and around 50 Remington casings. I have settled on trying Speer Hot-Cor 100 gr. Spitzers. Going to load them using 46grs. of IMR 4350 and CCI primers. Question is, can I reload all the casings the same way? Or, will the +P casings shoot different??? Sure don`t want to blow my 7600 or me up!!! Thanks in advance....
Logged

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: .257 Roberts casing question....
« Reply #1 on: April 14, 2011, 08:51:09 AM »
I would guess that the +P cases are heaver and would have a smaller capicity. While they might still be safe with the same load they would be faster.
Logged

Offline parkergunshop

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 349
  • Gender: Male
  • Retired Computer Tech, Gunsmithing as a hobby
Re: .257 Roberts casing question....
« Reply #2 on: April 14, 2011, 09:27:08 AM »
Simply fill one case of each brand with gunpowder and weigh each one of them to see how many grains of powder they hold.   If they hold within 1/2 grain of each other capacity wise,  I would not worry about keeping them separate and having to work up two different loads due to powder capacity differences in the brass.
Logged
U.S. Airforce 1961-1967
Lackland AFB,  Sheppard AFB, Texas
Homestead AFB FLorida, 1962-63 Cuban Crisis
Loring AFB, Maine 1963-1964
AFTAC Alexandria, VA 1965-1967
Air Force Competition Rife Team
NRA Endowment Life Member
National Benchrest Rifle Shooters Association

Freedom is not cheap in any sense of the word.  Only those willing to fight for it will have it in the long run.

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: .257 Roberts casing question....
« Reply #3 on: April 14, 2011, 11:18:22 AM »
Most of the time when you mix brands/makes of cases they will not shoot to the same POI. You may get great groups using the same powder charge and everything else but they usually will not shoot to the same POI if you mix them.
Logged
Pages: [1]   Go Up
« previous next »