« previous next »
Pages: [1]   Go Down

Author Topic: Encore action screw torque  (Read 714 times)

0 Members and 1 Guest are viewing this topic.

Offline Gmag

  • Trade Count: (3)
  • Member
  • *
  • Posts: 19
  • Gender: Male
Encore action screw torque
« on: April 30, 2011, 12:40:13 PM »
I have a thumbhole laminate stock that is causing me some problems.  When I tighten the action screw down tight, the hammer will not stay cocked.  I've relieved stock material to make sure nothing is binding but when I tighten it down more than lightly snug, same problem with the hammer not cocking fully.  Could a to long of stock bolt be causing the action to bind?  I'm at a loss.
Logged

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: Encore action screw torque
« Reply #1 on: April 30, 2011, 02:11:22 PM »
i think your screw is to long but some washers on it  8)
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline DEACONLLB

  • GBO Supporter
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 2458
  • Gender: Male
Re: Encore action screw torque
« Reply #2 on: May 01, 2011, 01:28:03 PM »
That is the problem I had the same with a custom stock and had to shim both sides in order to keep it from going off when I touched the trigger.

Deaconllb
Logged
Korean war vet. NRA Member
Fourth fighter wing K14 Kimpo Korea 1952 Fourth but first, the mig killers.
533rd material ,air defense Oxnard AFB 1953-1955
Pastor of the  CBCG-Fellowship group Tulsa Oklahoma.

Offline Gmag

  • Trade Count: (3)
  • Member
  • *
  • Posts: 19
  • Gender: Male
Re: Encore action screw torque
« Reply #3 on: May 02, 2011, 01:17:45 PM »
Thanks for the help guys.  I thought the screw lenth might be the problem but wanted to see if anyone else had experienced it.
Logged
Pages: [1]   Go Up
« previous next »