« previous next »
Pages: [1]   Go Down

Author Topic: 30-06 and H4350  (Read 3167 times)

0 Members and 1 Guest are viewing this topic.

Offline fatercat

  • Trade Count: (14)
  • A Real Regular
  • ****
  • Posts: 690
30-06 and H4350
« on: April 19, 2011, 02:04:51 AM »
has anyone tried H4350 with 180 gn. bullet?  looks like lower pressure and higher speed at the hodgdon web sight.
Logged

Offline PowPow

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1838
  • Gender: Male
Re: 30-06 and H4350
« Reply #1 on: April 19, 2011, 02:13:00 AM »
That's the one I settled on. Great accuracy out of my #1-rsi.
Logged
The difference between people who do stuff and people who don't do stuff is that the people who do stuff do stuff.

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: 30-06 and H4350
« Reply #2 on: April 19, 2011, 03:04:41 AM »

Any of the 4350s are good with 180s in the 06.
Logged

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: 30-06 and H4350
« Reply #3 on: April 19, 2011, 09:56:42 AM »
Yep, any of the 4350 types are good to try.
That powder is excellent for 165 gr bullets as well.
Logged
What is the point of Life if you can't have fun.

Offline us920669

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 529
Re: 30-06 and H4350
« Reply #4 on: April 19, 2011, 10:05:25 AM »
Ditto all above - exactly my preferred load.
Logged

Offline WyoStillhunter

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 299
Re: 30-06 and H4350
« Reply #5 on: May 17, 2011, 06:58:43 AM »
In the 30-06 with 180 gr. bullets IMR 4350 has been the favorite of such knowledgeable folks as Warren Page, Hank Waters and Finn Aagaard...and I think it was for O'Connor, as well.

There is every reason to believe a great load could be developed with very little trouble using H4350.
Logged
Quote
Hunt close, then get closer.

Offline roper

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 714
Re: 30-06 and H4350
« Reply #6 on: May 17, 2011, 02:58:14 PM »
Quote from: fatercat on April 19, 2011, 02:04:51 AM
has anyone tried H4350 with 180 gn. bullet?  looks like lower pressure and higher speed at the hodgdon web sight.

I'm shooting H-4350 with 180gr Partition in a custom 30-06 with Bartlein barrel.  I've also use same powder/bullets in two other 30-06 great results.  H-4350 is one of Hodgdon Extreme  Powders and I've shot it down  to -27 on an elk hunt. 

Well good luck
Logged

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
Re: 30-06 and H4350
« Reply #7 on: May 17, 2011, 03:06:57 PM »
works well for me with 150 grn bullets as well. very versatile and common powder.
Logged

Offline roper

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 714
Re: 30-06 and H4350
« Reply #8 on: May 17, 2011, 05:21:40 PM »
Quote from: hillbill on May 17, 2011, 03:06:57 PM
works well for me with 150 grn bullets as well. very versatile and common powder.

I have another 30-06 with a Shilen barrel set as a late season cow elk rifle and I'm shooting 150gr E-Tip with H-4350 and I'll use that rifle this year if I draw a late cow tag.  I've shot alittle IMR-4350 in that rifle and I got some good groups velocity was so-so.
Logged

Offline Mikey

  • GBO Supporter
  • Moderators
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: 30-06 and H4350
« Reply #9 on: May 18, 2011, 02:20:54 AM »
4350 works very well to excellent in my 06s.  With a 180 gn bullet, 4350 can give you a low pressure accuracy load at 38k cup pressure and 2450'/sec, a factory duplication load at 45k cup pressure and 2650'/sec as well as a higher pressure accuracy loading at 50k cup pressure and 2800'/sec.
Logged

Offline yooper77

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1746
  • Gender: Male
Re: 30-06 and H4350
« Reply #10 on: May 18, 2011, 03:09:30 AM »
Quote from: fatercat on April 19, 2011, 02:04:51 AM
has anyone tried H4350 with 180 gn. bullet?  looks like lower pressure and higher speed at the hodgdon web sight.

IMR4350, AA4350 or H4350 are all historic powders for use in the 30-06 Springfield and 180 grain bullets.

I use IMR-4350 in my 243 Winchester with 95-100 grain bullets, 270 Winchester with 130-150 grain bullets, 7mm-08 Remington & 7mm (7x57) Mauser Ackley Improved with 140-154 grain bullets and of course 30-06 Sprigfield Ackley Improved with 150-180 grain bullets.

I will soon add my favorite of all cartridges the venerable 338-06 A-Square with 180-250 grain bullets.

yooper77
Logged

Offline parkergunshop

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 349
  • Gender: Male
  • Retired Computer Tech, Gunsmithing as a hobby
Re: 30-06 and H4350
« Reply #11 on: May 18, 2011, 04:20:27 AM »
I don't use the 180 grain bullets, but with the 165 grain Nosler a load two grains less than the maximum load listed on the Hodgon Website gives 2807 FPS with H4350 and groups into less than 1 inch for 3 shots at 100 yds consistently.   For deer hunting most of  us in my area use the 165 or less weight bullets.

I still have a stock of H380 left to use with the 130 grain bullets that shoots .5-.6 tenth inch groups at 100 yards for 3 shots.

H4350 for the 150, 165 and 180 grain bullets,  H380 for the lighter ones.  2nd choice H4895 is close enough to use when my supply of H380 runs out for the lighter bullets.
Logged
U.S. Airforce 1961-1967
Lackland AFB,  Sheppard AFB, Texas
Homestead AFB FLorida, 1962-63 Cuban Crisis
Loring AFB, Maine 1963-1964
AFTAC Alexandria, VA 1965-1967
Air Force Competition Rife Team
NRA Endowment Life Member
National Benchrest Rifle Shooters Association

Freedom is not cheap in any sense of the word.  Only those willing to fight for it will have it in the long run.

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: 30-06 and H4350
« Reply #12 on: May 19, 2011, 06:18:14 AM »
Not in contradiction to the above, if the 4350 family doesn't work for you, IMR 4064 was /is a traditional powder for the 30-06 as well.
Logged
What is the point of Life if you can't have fun.

Offline 03A2

  • Trade Count: (1)
  • Member
  • *
  • Posts: 62
Re: 30-06 and H4350
« Reply #13 on: June 03, 2011, 08:42:14 PM »
IMR 4350 was also Whelens favorite with the sierra 180 btsp, in his book "why not load your own" he recommends 56 grains for all around hunting and 57 as a 1000 yard match load but cautions not to use it on hot days as pressure is high.  This matches hodgdons website where they list 56.5 grains as a max load with that bullet.  I worked up to that load and have been very happy with it.  Dropped a spike elk last fall with one shot, my first one shot elk.  As an aside, this is one reason I really like the IMR powders, they seem more consistent year in, year out, from manual to manual.
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18372
Re: 30-06 and H4350
« Reply #14 on: June 05, 2011, 02:45:25 AM »
I never much saw the need for a 180 grian bullet in an 06. I keep them for the 300 mags but my best load in my rem o6 is a ww 150 power point bullet with h4350. I just shot some yesterday to make sure it was still sighted in and shot a 1/2 inch 5 shot group at a 100 yards so that 4350 powder has to be good for something!!
Logged
blue lives matter
Pages: [1]   Go Up
« previous next »