« previous next »
Pages: [1]   Go Down

Author Topic: 44 Mag Overbore  (Read 488 times)

0 Members and 1 Guest are viewing this topic.

Offline ideal60

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
44 Mag Overbore
« on: May 21, 2011, 04:59:51 PM »
I needed advise on my inaccurate 2001 44 mag handi a few months ago. You guys gave me some great ideas! I slugged the bore, it was .432 which is .002 over. I was advised to find a caster to make some .432 lead bullets. I obtained some .432 cast flat nosed gas checked 250 grain bullets.
The results were a dramatic improvement in accuracy. Using lyman load data, both unique and h110 have worked great, except for POI changes. Next bullet order i will get some .433 dia. to try.
I also finally replaced the plastic sights on the .500 S&W mag. I installed a NDS38 reciever sight, a marbles .225 ramp and a .375 marbles fire sight. This set up will work on a huntsman as well.(same barrell dimensions) It took 4 months to get the ramp, but was worth the wait.It shot very well 400 grain JSP with unique powder, lyman data. Reduced load, acceptable recoil. Thank you all, Ideal 60
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 44 Mag Overbore
« Reply #1 on: May 22, 2011, 12:05:39 AM »
My over bore .44 is reamed to .445.  I got .433 GC bullets from Montana Bullet Works and they shoot well.  They chambered a little too tight.  Running them through the Lee Factory Crimp Die solved that problem.  I've got a BC Cabine stock set coming for it and I'm going to cut it to 18 inches.  Good luck and good shooting.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline ideal60

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: 44 Mag Overbore
« Reply #2 on: May 22, 2011, 02:22:53 PM »
Pete, Montana bullets is the source i used also. Dave has good stuff, reasonable and quick. The chamber on mine is pretty loose, so no problem there. Just deprime, bell, prime and load. No resize. The rounds are a little swollen next to base but work well and no problem chambering them. Next order will be .433 also. Howard 
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 44 Mag Overbore
« Reply #3 on: May 23, 2011, 04:03:46 PM »
See if he will send you about five at .433 to trial fit. Most will, it beats getting 100 that don't fit.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: 44 Mag Overbore
« Reply #4 on: May 23, 2011, 04:12:21 PM »
i have the overbore 44  too

never had a problem  with honady 300
and  my  own  cast  280 WFN.....un sized

then i got a sizing die.......and tumbleing  bukkets
  just got  a 431 sizer...if that don't work

just have to make a run  of  un-sized  and keep them out of the revolver
[the  unsized  often  won't chamber in my revolvers]

pm  me if you want to try some of my slugs
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.
Pages: [1]   Go Up
« previous next »