« previous next »
Pages: [1]   Go Down

Author Topic: Got my 45/70 put together...  (Read 753 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeff O

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Got my 45/70 put together...
« on: May 18, 2011, 11:20:15 AM »
Hi everyone. I've been lurking on this forum since i got this... sometime before Remington took over. I've been putting parts and pieces on it since then and finally got it all put together. 

Scope is a Redfield 3-7x33 with Warn QR rings - medium I think - and a Weaver 82 base

The stock set arrived the other day and required more work than I thought. First I had to ream out the bolt hole. Next the but plate required some attention.  One of the holes was off-center so, I plugged it and drilled it out again . From there it took some bending and some filing to get it right. By now the factory screws were pretty torn up so I replaced them with some polished brass.  Now I am working on the stock finish with a few drops of true-oil on some 1500 grit paper.

I think I somehow I ended up with the Classic forend and not the Carbine forend but that's ok,  I like it.

My name is Jeff and I'm a handiholic....

Logged

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: Got my 45/70 put together...
« Reply #1 on: May 18, 2011, 11:27:02 AM »
45-70 with trapdoor loads is a great caliber in a handi.
Logged

Offline Farrier Matt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
Re: Got my 45/70 put together...
« Reply #2 on: May 18, 2011, 11:53:35 AM »
Pretty work Jeff. Can you see the iron sights well enough when the scope comes off?
Logged

Offline Jeff O

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Re: Got my 45/70 put together...
« Reply #3 on: May 18, 2011, 12:07:09 PM »
Hey, thanks. The scope rail is grooved down the center so it does not obstruct the sights but it is a bit distracting.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Got my 45/70 put together...
« Reply #4 on: May 18, 2011, 01:34:32 PM »
Jeff,

Welcome to the Handiholic 12 step program. ;D   Very nice gun!  +1 on the trapdoor loads and the steel butt plate.  I learned that the hard way, same way I learn most stuff. :P

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline rdlange

  • GBO Supporter
  • Trade Count: (52)
  • Senior Member
  • *****
  • Posts: 1122
  • Gender: Male
Re: Got my 45/70 put together...
« Reply #5 on: May 20, 2011, 01:06:20 PM »
Looks better with the longer forend, I think. JMHO...
Logged
Think as if you LIFE depends on it... IT does..!  Be Well...

Offline Slowhanddd

  • GBO Supporter
  • Trade Count: (43)
  • A Real Regular
  • *****
  • Posts: 691
  • Gender: Male
Re: Got my 45/70 put together...
« Reply #6 on: May 20, 2011, 02:53:47 PM »
Quote
Welcome to the Handiholic 12 step program.
12 steps.That means i must buy more guns!!!!!!!I only have seven.
Logged
Life is not about how fast you run, or how high you climb, but how well
you bounce

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
Re: Got my 45/70 put together...
« Reply #7 on: May 21, 2011, 03:28:01 AM »
Beautiful gun. nice work. :)
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: Got my 45/70 put together...
« Reply #8 on: May 21, 2011, 08:37:05 AM »
Very nice love the grain in the butt stock! And yes it sounds like you are only on step 7 when you get to step 12 just repeat them.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline Jeff O

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Re: Got my 45/70 put together...
« Reply #9 on: May 23, 2011, 05:39:45 PM »
12 step program? Does that mean I have to buy at least 11 more?  ;D  :o

Trapdoor loads sound sound like the way to go but I did buy some Buffalo Bore 405s just to say I tried 'em 8)  ;D
Logged
Pages: [1]   Go Up
« previous next »