« previous next »
Pages: [1]   Go Down

Author Topic: Kel-Tec 40 cal  (Read 3400 times)

0 Members and 1 Guest are viewing this topic.

Offline ratdog

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1000
Kel-Tec 40 cal
« on: March 04, 2011, 11:50:37 PM »
has anybody had a 40 cal and did they like it.i read some  where they made them sounds like a potent little mose gun. ive had the 380 years ago was not impressed. ive got all stuff to reload 9mm have 1000 or more  cases ready to go just slow. have a fine week end.ray
Logged

Offline ratdog

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1000
Re: kelted 40 cal
« Reply #1 on: March 08, 2011, 01:39:37 AM »
WELL I SEARCHED KELTEC 40 CAL ON WEB IT IS NOT MADE ANY MORE WAS SOLD AS KIT WITH ONLY THE SLIDE AND SPRINGS BARREL IT HAD A FAIL TO CHAMBER PROBLEM. THIS WAS MOUNTED ON THE  P11. MODIFIED THE MAG SOME WORKED GREAT SOME DID'NT  KICKED LIKE A MULE THEY ARE HARD TO FIND. I WOULD LIKE TO TRY ONE BUT I'M SATISFIED WITH MY P11 AND PF9.THEY HAVE GONE THROUGH A LOT OF TRIAL AN ERROR.HAVE A  GREAT WEEK . 
Logged

Offline bowtieracin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: kelted 40 cal
« Reply #2 on: May 29, 2011, 04:54:06 AM »
Ratdog the 40's were made as a stand alone gun also. the kit came later after they stopped making the gun itself.
Logged

Offline stoutstuff

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 102
  • Gender: Male
Re: kelted 40 cal
« Reply #3 on: May 30, 2011, 05:43:16 AM »
Why not a PF9 if you have the stuff to reload?
Logged

Offline ratdog

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1000
Re: kelted 40 cal
« Reply #4 on: May 30, 2011, 05:54:10 AM »
had a pf 9 mag kept falling out put new parts in same thing sold it ill stick with the p11.don't need a 40 cal just curious.
Logged

Offline Red Hat

  • Trade Count: (5)
  • Member
  • *
  • Posts: 16
  • Gender: Male
  • USAF Retired, CATM 71-93
Re: kelted 40 cal
« Reply #5 on: May 30, 2011, 06:36:10 AM »
I have a Kel-Tec P40 and like all Kel-Tec's a fluff and buff is mandatory!  Mine feeds and fires everything I put through it.  The P40 is definitely a hand full!  Recoil is pretty stout!  Kel-Tec stopped producing them because of the recoil and the fact that most people had a tendency not to lock their wrist when firing the P40.  This caused a lot of the problems of FTF.  Slide and barrel conversion kits were produced for the P11 which is the same receiver as the P40.  Conversion kits pop up for sale occasionally for around $200.  P40 magazines are still available and I think Kel-Tec still sells them also.  They also produced a P357 sig conversion which uses P40 magazines.  I have one and like it better than the P40.
Logged
NRA Life/Endowment/Patron

"To preserve liberty, it is essential that the whole body of people always possess arms, and be taught alike, especially when young, how to use them..." Richard Henry Lee 1788

Offline Ron T.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 646
Re: Kel-Tec 40 cal
« Reply #6 on: July 25, 2011, 01:02:25 PM »
It's pretty hard to beat the P-11 with its 10 round magazine + one in the chamber.  It's very reliable once you get it "broken in" and it is small enough to be easily concealed on my hip in an Uncle Mike's belt-holster stoked with +Ps.  I don't shoot the +Ps very often since Kel-Tec warns the P-11 is "ok" for just "occasional use" with +Ps and the "occasion" will be if I need to use it for defensive purposes.
 
I have a great deal more "faith" in the P-11 compared to my P3AT (.380)... but both have their purpose.  The P3AT is great for deep concealment, but its .380 round doesn't have the "punch" of the P-11's 9x19... and I prefer the extra capacity of the P-11 over the single stack PF9.  Like I said before, I believe the P-11 is hard to beat.
 
Just my 2¢...  :)
 
 
Strength & Honor...
 
Ron T.
Logged
"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government."  - Thomas Jefferson
Pages: [1]   Go Up
« previous next »