« previous next »
Pages: [1]   Go Down

Author Topic: Add a 9 mm cyl. to a Blackhawk 357 mag.  (Read 623 times)

0 Members and 2 Guests are viewing this topic.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Add a 9 mm cyl. to a Blackhawk 357 mag.
« on: July 11, 2011, 04:55:49 AM »
 A few weeks ago i got a New Mod. Blackhawk in 357 mag. It was missing the front frame screw and ejector rod, housing,screw and spring. It lookes worn but the chambers and bore were nice. It is a project gun . After getting all the needed parts and making repairs and a good cleaning it shot well.
 So over the weekend i found a 9mm cyl. at a gun show and decided to see if it would fit . It did but was to tight to rotate as freely as it should. So now its at the gunsmith getting fitted , as he put it tight is better than lose in these cases .
When all is said and done total cost is close to 304.00 ( can't remember the change ) .
 Was it worth it ?
Logged
If ya can see it ya can hit it !

Offline dks7895

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 292
  • Gender: Male
Re: Add a 9 mm cyl. to a Blackhawk 357 mag.
« Reply #1 on: July 11, 2011, 05:06:20 AM »
I recently paid $469 for a brand new .357/9mm Blackhawk convertible.  It's a 4 5/8" blued with black plastic grips.  I think you did pretty good.
Logged
Winchester 100 .243; Marlin XS7 .308; Stevens 200 .223; Rossi 92 .45LC; Marlin 1894C .357M; Marlin 30AS .30-30; NEF Pardner Pump 12ga; Mossberg 500 Turkey 20ga; Winchester 1200 20ga; Savage Mark II F .22LR; Henry H001 .22LR; Marlin 60SB .22LR; Ruger 10/22 DSP .22LR; Remington Genesis .50 cal ML; Ruger Vaquero .45LC; Ruger Blackhawk .357M; Ruger SR9c 9mm; Ruger Single-Six .22LR; Browning Buck Mark Camper .22LR; Crosman Powermaster 760 .177; Crosman Storm XT .177; Mission X3

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Add a 9 mm cyl. to a Blackhawk 357 mag.
« Reply #2 on: July 11, 2011, 05:12:48 AM »
Years ago I had one and it shot well , the 9mm cyl wasn't as accurate as the 357 one but still good . The recoil was like a 22 mag or less . The one I'm working with is 4-5/8's . 9mm is about as cost effective as ammo gets for center fire here .
Logged
If ya can see it ya can hit it !

Offline Tom C.

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 382
Re: Add a 9 mm cyl. to a Blackhawk 357 mag.
« Reply #3 on: July 13, 2011, 10:20:58 AM »
I sent an old stainless 4 5/8" .357 NMBH to Ruger to get it rebuilt and add a 6 1/2" barrel. I also asked for a 9mm cylinder which they provided. The gun is very accurate in .357 and much more accurate than I expected in 9mm, at least with CCI Blazer ammo. You can have fun with inexpensive 9mm ammo. You got a pretty descent deal.
Logged
Tom

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Add a 9 mm cyl. to a Blackhawk 357 mag.
« Reply #4 on: July 13, 2011, 10:38:03 AM »
 I hope so . The gun could stand reblueing maybe but as is it will get carried alot .
Logged
If ya can see it ya can hit it !
Pages: [1]   Go Up
« previous next »