« previous next »
Pages: [1]   Go Down

Author Topic: Reeming a Tracker 2 to 3.5"  (Read 638 times)

0 Members and 1 Guest are viewing this topic.

Offline GrassLakeRon

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 515
  • Gender: Male
Reeming a Tracker 2 to 3.5"
« on: July 22, 2011, 12:59:18 AM »
Ok group.....

Other then recoil, what are the issues with reeming the Tracker 2 out to 3.5" to except the longer shells?

As always, thanks for the info

Ron


Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #1 on: July 22, 2011, 06:49:44 AM »
I wouldn't recommend it, the chamber wall likely isn't thick enough, 3½" pressures are higher than 3", 14kpsi compred to 11.5kpsi.

Tim

http://www.leverguns.com/articles/saami_pressures.htm
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #2 on: July 22, 2011, 07:27:42 AM »
I believe the only ones that are being reamed are the big ultra slugger bbl's must be a reason for it. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Reeming a Tracker 2 to 3.5"
« Reply #3 on: July 22, 2011, 08:11:49 AM »
I have never seen 3.5" 12 ga slug ammo.  Hastings was reaming Ultra Slug hunters to 3.5" but it was only the 20 ga versions.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: Reeming a Tracker 2 to 3.5"
« Reply #4 on: July 22, 2011, 08:28:08 AM »
I think Lightfield might make 3.5" slugs but my shoulder hurts just thinking about it.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #5 on: July 22, 2011, 11:14:01 AM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Reeming a Tracker 2 to 3.5"
« Reply #6 on: July 22, 2011, 03:00:44 PM »
I stand corrected.  In an unmodified Tracker II that would be interested to watch someone else shoot one. :o   I think I will stick with my 410 slug gun.  At $3.50 to $4.00 dollars a round you would want to use a single shot as a man could go broke with them things in a autoloader. ;)
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline GrassLakeRon

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 515
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #7 on: July 22, 2011, 04:41:05 PM »
In the big bore forum, the 12GA(FH) post got me thinking.  I saw that the remington buckhammers, according to Ed run 15k pressure (post #45, page 2)........ I have shot them in the tracker 2 with no issues.  Now if his pressures are correct, then the Lightfields would work in the tracker 2.  Does anyone know the pressures according to remington for the buckhammers, I have not gotten a response from them.

Ron
Logged

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
Re: Reeming a Tracker 2 to 3.5"
« Reply #8 on: July 23, 2011, 06:50:46 AM »
I've got a ush in12ga. Where would I get I reamer for it. Hadn't thought of that option , but I'm very intriqued.
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline GrassLakeRon

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 515
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #9 on: July 23, 2011, 11:59:35 AM »
Also consider a quote from James Gates, president and owner, of Dixie Slugs, "We should considerr our work within 14,500 psi. Since there are no old firearms in the new 3 1/2" shell, allowable pressures have been set up. However the frames on the 3 1/2" guns are the same parts, etc. as the 3" guns." - http://shootersforum.com/showthread.htm?p=70068 - "For those that plan to go higher than the loads tested, I suggest buying a NEF single barrel.".  Now I have talked to James this spring and ask him about shooting his loads in my tracker 2, which he said was fine.  Now I do trust what Tim is saying, I really do, but is SAAMI giving a pressure based on older 12 gauge guns or is this a case of conservative ratings.  I'm am not trying to get band here, or an up rising of the masses, just a question based on all the sources I ask.  I want to do as much research as possible before I make, what could be, a critical error.....  Again thanks for all the info.

Ron
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Reeming a Tracker 2 to 3.5"
« Reply #10 on: July 23, 2011, 02:14:41 PM »
Ron,
 
The USH 12 ga barrel and the Tracker II are not the same animal.  The USH is factory D/T for a scope base while H&R does not D/T the tracker II 12 ga barrel.  The USH 12 ga uses the 10 ga SB2 frame so it has a large diameter at the chamber swell than the 12 ga. tracker barrel.  The extra range or energy you get from the 3.5 inch sabot may not be worth the risk you would be taking with a 3.5" chambered Tracker II. 
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #11 on: July 23, 2011, 03:20:12 PM »
H&R does offer 3½" 12ga on standard barreled SB1 framed shotguns, but I'd surely not drill and tap the T2 for a scope base, that could be a disaster waiting to happen, probably be Ok using the barrel sight tho.

Tim

http://www.hr1871.com/Firearms/Shotguns/pardnerTurkey.asp
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: Reeming a Tracker 2 to 3.5"
« Reply #12 on: July 23, 2011, 04:37:46 PM »
I don't like shooting 2 3/4 lyman sabot reloads from my tracker 2 I can't imagine shooting 3 1/2 slugs out of it
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline S.E.Ak

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 808
  • Gender: Male
  • Wrangell Ak
Re: Reeming a Tracker 2 to 3.5"
« Reply #13 on: July 25, 2011, 09:44:38 PM »
Don't forget the forceing cone as it will need some work
Logged
Pages: [1]   Go Up
« previous next »