« previous next »
Pages: [1]   Go Down

Author Topic: New bolt required for rebarrel from 22-250 to 308?  (Read 1662 times)

0 Members and 3 Guests are viewing this topic.

Offline Rockin Double B

  • Trade Count: (12)
  • Member
  • *
  • Posts: 51
New bolt required for rebarrel from 22-250 to 308?
« on: July 21, 2011, 06:34:35 AM »
I am considering re-barreling a 700 VS from 22-250 to 308 to be used for long range shooting.  Would that caliber switch require anything besides a new barrel?  Thank you all for the info. 
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: New bolt required for rebarrel from 22-250 to 308?
« Reply #1 on: July 21, 2011, 06:43:09 AM »
open the bolt face and fit it to the new bbl.
Logged
If ya can see it ya can hit it !

Offline parkergunshop

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 349
  • Gender: Male
  • Retired Computer Tech, Gunsmithing as a hobby
Re: New bolt required for rebarrel from 22-250 to 308?
« Reply #2 on: July 21, 2011, 07:11:14 AM »
The .22/250 and .308 Winchester case have the same case head size, no change is necessary to the bolt face or extractor if the new round is a .308 Winchester.
 
You did not state however which .308 case you will be changing to.   If it is a belted magnum .308 then the bolt face will need to be opened up and the extractor modified.   And the .22/250 length action may not be long enough for the round.
Logged
U.S. Airforce 1961-1967
Lackland AFB,  Sheppard AFB, Texas
Homestead AFB FLorida, 1962-63 Cuban Crisis
Loring AFB, Maine 1963-1964
AFTAC Alexandria, VA 1965-1967
Air Force Competition Rife Team
NRA Endowment Life Member
National Benchrest Rifle Shooters Association

Freedom is not cheap in any sense of the word.  Only those willing to fight for it will have it in the long run.

Offline Rockin Double B

  • Trade Count: (12)
  • Member
  • *
  • Posts: 51
Re: New bolt required for rebarrel from 22-250 to 308?
« Reply #3 on: July 21, 2011, 08:06:59 AM »
Wow, thank you all for the timely and accurate info.  Sorry for not being specific about the 308 cartridge but, it would be the straight 308 Winchester with the intended use as F class and/or 500-800 yard target (only) shooting.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: New bolt required for rebarrel from 22-250 to 308?
« Reply #4 on: July 21, 2011, 08:58:18 AM »
Quote from: parkergunshop on July 21, 2011, 07:11:14 AM
The .22/250 and .308 Winchester case have the same case head size, no change is necessary to the bolt face or extractor if the new round is a .308 Winchester.
 
You did not state however which .308 case you will be changing to.   If it is a belted magnum .308 then the bolt face will need to be opened up and the extractor modified.   And the .22/250 length action may not be long enough for the round.
Close enough , I wasn't sure Rim .4728 vs .473 and base .4709 vs .471  :)
Logged
If ya can see it ya can hit it !

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: New bolt required for rebarrel from 22-250 to 308?
« Reply #5 on: July 21, 2011, 04:00:58 PM »
No change, just a new barrel.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."
Pages: [1]   Go Up
« previous next »