« previous next »
Pages: [1]   Go Down

Author Topic: reloading for NEF pardner shotgun reciever  (Read 481 times)

0 Members and 1 Guest are viewing this topic.

Offline weber

  • Trade Count: (1)
  • Member
  • *
  • Posts: 38
reloading for NEF pardner shotgun reciever
« on: July 18, 2011, 02:01:52 PM »
Hello all , I am going to shoot a new barrel I have , its chambered for 45/410 . I want to know can the receiver take full powered 45LC loads . Can these shotgun receivers handle loads on par for TC/Ruger#1 , or do I start at Colt SA levels?
Thanks
Logged

Offline FLNT4EVR

  • GBO Supporter
  • Trade Count: (8)
  • A Real Regular
  • *****
  • Posts: 603
  • Gender: Male
Re: reloading for NEF pardner shotgun reciever
« Reply #1 on: July 18, 2011, 02:31:43 PM »
In a short answer .....yes. They will handle any load a modern 45 colt will handle........accuracy is another question al together
Logged
" Act civilized...even if you ain't " 
 
" I won't be wronged. I won't be insulted. I won't be laid a hand on. I don't do these things to other people , and I require the same from them. "
                                  John Wayne, "The Shootist"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: reloading for NEF pardner shotgun reciever
« Reply #2 on: July 18, 2011, 02:38:07 PM »
The SB1 frame that comes on the 45/410 is the same frame that H&R uses on the current 44mag which has a higher SAAMI MAP at 36kpsi than 45 Colt TC/Ruger(+P) loads, plus the extreme freebore with Colt loads will reduce pressure and breech thrust by a substantial amount, unfortunately, it does the same to accuracy.  :-\

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: reloading for NEF pardner shotgun reciever
« Reply #3 on: July 19, 2011, 03:23:09 AM »
What type of steel is the 45lc/410 barrel?
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: reloading for NEF pardner shotgun reciever
« Reply #4 on: July 19, 2011, 06:43:31 AM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: reloading for NEF pardner shotgun reciever
« Reply #5 on: July 19, 2011, 08:37:14 AM »
Tim,
 
Want to make sure I get this right since I am thinking about a 45lc/410.  I know that an SB1 is good for 44 Mag SAAMI spec loads.  With the barrel on the 45/410 being 1137 mild steel (shotgun barrel steel I assume) then the weak link in this gun is the chamber?  So is a ruger/TC 45LC load too much pressure for the 45lc/410 barrel?  I understand that the bullet jump will moderate the pressure spike but am thinking along the lines of a cartridge that would allow the 45 slug to be near on touching the rifling.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: reloading for NEF pardner shotgun reciever
« Reply #6 on: July 19, 2011, 10:41:48 AM »
I don't see it as a problem if you keep the pressures low, JerryKo did quite a bit of shooting with his on an SB2 frame using longer brass, another member is using 9.3x72 brass and Trail Boss. One problem I see is drilling and tapping the barrel for a scope base, I suspect that's the reason for the 444 Contender blow up, he had a 6-hole mount on it!  ::)

Tim

http://www.gboreloaded.com/forums/index.php/topic,223383.msg1099227298.html#msg1099227298

http://cdk357.tripod.com/444blowup.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: reloading for NEF pardner shotgun reciever
« Reply #7 on: July 19, 2011, 02:04:58 PM »
There's a thread in the FAQs(who'd a guessed!!  ::)) on handloading for the 45/410.

Tim

http://www.gboreloaded.com/forums/index.php/topic,155894.msg1098675316.html#msg1098675316
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: reloading for NEF pardner shotgun reciever
« Reply #8 on: July 19, 2011, 02:55:15 PM »
Thanks Tim, I may have to take a look at those FAQs one day. ;D    Looks like the 45LC/410 barrel gives me another oppurtunity (excuse) to resize winchester 410 AA hulls.  I wonder if Budgunshop is on line right now?

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.
Pages: [1]   Go Up
« previous next »