« previous next »
Pages: [1]   Go Down

Author Topic: Need speer load data  (Read 479 times)

0 Members and 2 Guests are viewing this topic.

Offline jake

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 171
Need speer load data
« on: November 21, 2011, 02:54:29 PM »
Can anyone give me the load data for speer 85gr spbt with IMR4350 powder.
 
Min and Max load
Logged
jake

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Need speer load data
« Reply #1 on: November 21, 2011, 02:56:48 PM »
Sounds like you might be asking for a .243 load, but I'm really not sure.  Can you give out Caliber you are working with?  ;)
 
As it were I'm adding the .243 data, but you can get this by going to Hodgdon's website and clicking on their reloading data program.  ;)
Cartridge:
 243 Winchester
Load Type:
 Rifle
Starting Loads
 
Maximum Loads
 
Bullet Weight (Gr.)
Manufacturer
Powder
Bullet Diam.
C.O.L.
Grs.
Vel. (ft/s)
Pressure
Grs.
Vel. (ft/s)
Pressure

80 GR. HDY GMX
Hodgdon
H4350
.243"
2.610"
38.3
3045
52,600 PSI
40.7
3183
58,500 PSI
85 GR. BAR TSX
Hodgdon
H4350
.243"
2.620"
37.3
2972
49,600 PSI
40.5
3141
57,300 PSI
90 GR. SPR SP
Hodgdon
H4350
.243"
2.625"
42.0
3039
44,400 CUP
44.5
3185
50,600 CUP
95 GR. NOS PART
Hodgdon
H4350
.243"
2.650"
39.0
2917
45,800 CUP
42.0
3087
50,500 CUP
100 GR. SPR BTSP
Hodgdon
H4350
.243"
2.650"
37.0
2806
45,100 CUP
40.0
2973
51,000 CUP
105 GR. HDY A-MAX
Hodgdon
H4350
.243"
2.760"
35.0
2663
44,300 CUP
37.5
2799
49,500 CUP
107 GR. SIE BTHP
Hodgdon
H4350
.243"
2.850"
35.0
2671
43,100 CUP
37.5
2800
50,200 CUP
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline jake

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 171
Re: Need speer load data
« Reply #2 on: November 21, 2011, 03:05:52 PM »
Sorry it is for a .243 winchester
Logged
jake

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Need speer load data
« Reply #3 on: November 21, 2011, 03:19:58 PM »
Ok, well I guessed good then.  ;)  I think that Barnes TSX data should give you a good starting point.  ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline jake

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 171
Re: Need speer load data
« Reply #4 on: November 21, 2011, 03:26:57 PM »
whta is the differance in H4350 and IMR4350?
 
someone told me 42-46gr of IMR4350 with the 85gr bullet.
Logged
jake

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Need speer load data
« Reply #5 on: November 21, 2011, 03:40:30 PM »
My bad, very sorry, I don't use much Hodgdon powder, didn't notice my wrong pick:  8(
Cartridge:
 243 Winchester
Load Type:
 Rifle
Starting Loads
 
Maximum Loads
 
Bullet Weight (Gr.)
Manufacturer
Powder
Bullet Diam.
C.O.L.
Grs.
Vel. (ft/s)
Pressure
Grs.
Vel. (ft/s)
Pressure

85 GR. BAR TSX
IMR
IMR 4350
.243"
2.620"
37.4
2980
48,900 PSI
40.7
3176
57,800 PSI
90 GR. SPR SP
IMR
IMR 4350
.243"
2.625"
39.5
2856
42,700 CUP
43.0
3096
50,800 CUP
95 GR. NOS PART
IMR
IMR 4350
.243"
2.650"
38.0
2792
43,200 CUP
41.8
2993
50,200 CUP
100 GR. SPR BTSP
IMR
IMR 4350
.243"
2.650"
38.5
2760
43,000 CUP
42.0
2958
50,100 CUP
105 GR. HDY A-MAX
IMR
IMR 4350
.243"
2.760"
36.7
2648
43,000 CUP
40.2
2870
50,800 CUP
107 GR. SIE BTHP
IMR
IMR 4350
.243"
2.850"
36.5
2661
42,100 CUP
39.8
2853
50,600 CUP
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Need speer load data
« Reply #6 on: November 21, 2011, 03:42:07 PM »
Sounds like their load might be a bit high per manufacturer's spec.  Different manuals do have different findings though.  I always start at listed Minimum and work my way up.  ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline jake

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 171
Re: Need speer load data
« Reply #7 on: November 21, 2011, 03:45:44 PM »
Thanks Tacklebury, I'm like you I like to work from the low point.
 
Thanks Alot
Logged
jake

Offline George Foster

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 396
Re: Need speer load data
« Reply #8 on: November 22, 2011, 12:55:06 AM »
Speer Manual #14:
 
IMR4350
Min Load: 42.0gr
Max Load: 46.0gr
Logged
Good Shooting,
George

Offline jake

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 171
Re: Need speer load data
« Reply #9 on: November 24, 2011, 05:21:57 AM »
Thanks George, thats what i was looking for.
Logged
jake
Pages: [1]   Go Up
« previous next »