Author Topic: Can't print order form...  (Read 818 times)

0 Members and 1 Guest are viewing this topic.

Offline Bucks Owin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Can't print order form...
« on: November 13, 2011, 08:24:36 AM »
...because I don't have a printer!
 
I'd like to order 10 sticks of your fine bullet lube Veral. Can I simply send you a note and a check? (or money order if you prefer). I'm also somewhat confused which one to get. I used up 2 sticks I bought to try out from another source, which I believe was the soft variety, it looked sort of light blue in the  package tube, darker blue when on the bullet. I found I needed to turn on the heater with my old 450 when temps were in the 50's as I treat my sizer as gently as I can knowing it's limitations. In the summer, it flowed well enough without heat. I occasionally send lubed bullets to friends through the mail and would like the lube to stay on the bullet while undergoing the "postal torture test". (Lyman Super Moly fails) Should I order the commercial grade? On the other hand, temps here in North Kalifornia reach 100+ in the summer and aparently the soft grade is best in those conditions?
 
   At any rate, many thanks Veral for the best lube I've ever put on a bullet. I'm also very pleased with accuracy of a borrowed mold of your's I'm using at present (315K) in my .45 Blackhawk. I'm saving up for a 325 or 340 WFN mold of my own and an LBT BHN tester ASAP...
 
I appreciate your valuable time in response,
 
Dennis
 
PS: To further muddy the water, I plan to try cast bullets in a couple of old M54 and M70 Win .270s I own with an eye to max velocity obtainable so the lube you recommend as the best all around for both handgun and rifle bullet needs will be appreciated, If heat is needed, so be it....

Offline Veral

  • GBO Sponsor
  • Moderator
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1675
    • Lead Bullet Technology
Re: Can't print order form...
« Reply #1 on: November 15, 2011, 04:30:35 PM »
  You can send your order on any piece of paper, and a money order gets you the quickest service as we wait for personal checks to clear.   
emails are the quickest way to get a response from me, as I don't come to the forum sometimes for a week or two at a time.    You can also call me if email or whatever gives you hassles.

email      LBTisAccuracy@localnet.com
Phone   1 208 267 3588        You'll have a hard time getting me, but leave a message and I'll call back, or if my wife is near the phone she'll take your message.

  Because of your Lyman sizer being a bit of a whimp, I'd reccomend blue soft lube, so you don't have to mess with heat.  It stays on bullets quite well during shipping if you stack them in a box, standing on their bases, and something above holding them from rattling.  No other lube will match its performance in any kind of smokeless powder gun, or for blackpowder substitutes.  None of the lbt lubes work well for black powder though.
  A little tip on purchasing our products.  Get the molds you want first, tester last, especially if using wheel weight metal, which95% of my customers do.  Get the tester when you have to mix various unknown leads to make an alloy.
Veral Smith

Offline Bucks Owin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: Can't print order form...
« Reply #2 on: November 18, 2011, 04:31:35 AM »
  You can send your order on any piece of paper, and a money order gets you the quickest service as we wait for personal checks to clear.   
emails are the quickest way to get a response from me, as I don't come to the forum sometimes for a week or two at a time.    You can also call me if email or whatever gives you hassles.

email      LBTisAccuracy@localnet.com
Phone   1 208 267 3588        You'll have a hard time getting me, but leave a message and I'll call back, or if my wife is near the phone she'll take your message.

  Because of your Lyman sizer being a bit of a whimp, I'd reccomend blue soft lube, so you don't have to mess with heat.  It stays on bullets quite well during shipping if you stack them in a box, standing on their bases, and something above holding them from rattling.  No other lube will match its performance in any kind of smokeless powder gun, or for blackpowder substitutes.  None of the lbt lubes work well for black powder though.
  A little tip on purchasing our products.  Get the molds you want first, tester last, especially if using wheel weight metal, which95% of my customers do.  Get the tester when you have to mix various unknown leads to make an alloy.

Thank you for the reply Veral, a money order in the amount of $43 for 10 sticks of soft blue is on the way.
Happy thanksgiving, I hope your turkey is a wild one that you shot yourself...  ;)
 
 

Offline Bucks Owin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: Can't print order form...
« Reply #3 on: December 03, 2011, 02:40:02 PM »
 
 
Folks, I doubt a "postal week" expired before I had my fine LBT lube....Excellent service Veral, many thanks!
 
Dennis in Lakehead.... ;)