Author Topic: Technical question  (Read 859 times)

0 Members and 1 Guest are viewing this topic.

Offline JumpinJackFlash

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Technical question
« on: December 13, 2011, 04:20:09 AM »
In the AP Style Manual it is correct to put down ".22-caliber" when writing about a 22 caliber rifle.
 
I contend that "22 caliber" is more accurate than ".22-caliber" because you are actually stating that the bullet is 22/100 of 1/100 diameter.
 
My daughter is an editor of a small Midwest newspaper, and the police chief stated that a ".22 caliber rifle" was stolen. I believe that this statement is more accurate than a ".22-caliber" rifle.
 
A little input here would be welcome. I have seen my case stated previously in some publication, and I note that Speer manual always list calibers in their manual as 44-40, 44, and so on. the only decimal points are for the actual diameters of their reloading bullets.
 
Thanks
 
Jack 

Offline Empty Quiver

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2847
Re: Technical question
« Reply #1 on: December 13, 2011, 08:23:12 AM »
I would imagine you are technically correct. However I do it all the time myself, so I can't join the grammar nazi camp, and with out spell check my ramblings would be indecipherable (actually spelled that one without help :o  but rambleings not so much, ooh did it again).
**Concealed Carry...Because when seconds count help is only minutes away**

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Technical question
« Reply #2 on: December 13, 2011, 09:00:55 AM »
its the same with 45 Colt or 45 Long Colt . Back in the day it was a 45 Colt you ever see a 45 Colt short ? There was a 41 Long . Back to op , If the bore of the gun is being stated then the decimal seems correct forget the - , if the cartrage is being stated forget the dec. and - just my opinion for what little its worth !
If ya can see it ya can hit it !

Offline maddogg

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 120
  • Gender: Male
Re: Technical question
« Reply #3 on: December 13, 2011, 04:01:16 PM »
I thought the media called all long guns -Assault Rifles.
Do not argue with an idiot. He will drag you down to his
level and beat you with experience.

Offline powderman

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 32823
  • Gender: Male
Re: Technical question
« Reply #4 on: December 13, 2011, 04:37:00 PM »
Quote
its the same with 45 Colt or 45 Long Colt . Back in the day it was a 45 Colt you ever see a 45 Colt short ?

 
I may be wrong but I believe it was called the LONG colt because the 45 Schoefield ctg was shorter and less powerful and that was how they designated which ctg they were using. POWDERMAN.  ;D ;D
Mr. Charles Glenn “Charlie” Nelson, age 73, of Payneville, KY passed away Thursday, October 14, 2021 at his residence. RIP Charlie, we'll will all miss you. GB

Only half the people leave an abortion clinic alive.
http://www.youtube.com/watch?v=MAiOEV0v2RM
What part of ILLEGAL is so hard to understand???
I learned everything about islam I need to know on 9-11-01.
http://www.thereligionofpeace.com/
http://www.youtube.com/watch?v=TDqmy1cSqgo
http://www.youtube.com/watch?v=_u9kieqGppE&feature=related
http://www.illinois.gov/gov/contactthegovernor.cfm

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Technical question
« Reply #5 on: December 14, 2011, 03:18:43 AM »
I don't doubt that but that was a slang not correct.
If ya can see it ya can hit it !

Offline Old Syko

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2263
  • Gender: Male
Re: Technical question
« Reply #6 on: December 14, 2011, 04:18:15 AM »
Hmmm.  Seems to me the OPs question isn't really a technical question as stated but a question of semantics.  Just to be technical.  ;) ;D   Generally accepted terms are seldom technically correct but are used to convey a general understanding.

Offline Dixie Dude

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 4129
  • Gender: Male
Re: Technical question
« Reply #7 on: December 14, 2011, 04:38:39 AM »
It could be a .22LR caliber rifle stolen, or a 22 mag rife stolen.  I wouldn't worry about grammer when posting in the paper.  Like someone said, they are all full auto assault rifles to the mainstream media.  The 45 could also be the 45 acp.  I always thought it was designated as 45 long Colt to seperate it from a 45 acp Colt.   

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Technical question
« Reply #8 on: December 15, 2011, 05:16:23 AM »
45 Colt and 45 acp seems to be enough . And now the Glock round , would that be the super short 45 ?  ;D
If ya can see it ya can hit it !

Offline powderman

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 32823
  • Gender: Male
Re: Technical question
« Reply #9 on: December 15, 2011, 05:44:57 AM »
SHOOTALL. I reckon I'm behind on the info, I didn't know that glock had their own ctg. POWDERMAN.  :o :o
Mr. Charles Glenn “Charlie” Nelson, age 73, of Payneville, KY passed away Thursday, October 14, 2021 at his residence. RIP Charlie, we'll will all miss you. GB

Only half the people leave an abortion clinic alive.
http://www.youtube.com/watch?v=MAiOEV0v2RM
What part of ILLEGAL is so hard to understand???
I learned everything about islam I need to know on 9-11-01.
http://www.thereligionofpeace.com/
http://www.youtube.com/watch?v=TDqmy1cSqgo
http://www.youtube.com/watch?v=_u9kieqGppE&feature=related
http://www.illinois.gov/gov/contactthegovernor.cfm

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Technical question
« Reply #10 on: December 15, 2011, 07:02:38 AM »
they made a 45 that was shorter and a pistol with a thinner grip front to back for it. 45 cal in a 40 S&W size frame .
 
45 GAP , check it out
If ya can see it ya can hit it !