Handi grip stock question

[Deerhunter#1]

Will the forearm with this set fit the center fire bull barrels and heavy USH barrels? If not has anyone modified it to fit and how was it done. Thanks

[dave29]

 I know it won't wit a 12 gauge USH, not sure about a 20.

[cwlongshot]

Yes on the CF bull barrels. The USH 20 is a 12ga dia and the 12 USH is a 10ga diameter. It could be opened to fit pretty easily.

I have not tried it but it might fit the 20. But like Dave said doubtful
On the 12USH.

CW

[Deerhunter#1]

Im wondering if I was to get a similar size pipe and wrap it with some rough sang paper if I could sand it down to fit?

[Spanky]

Im wondering if I was to get a similar size pipe and wrap it with some rough sang paper if I could sand it down to fit?

 
Sure could.
 
 
 
Spanky

[OldSchoolRanger]

Im wondering if I was to get a similar size pipe and wrap it with some rough sang paper if I could sand it down to fit?

 
Sure could.
 
 
 
Spanky

Make sure you don't sand it down too much.

[quickdtoo]

Not gonna work very well on the 12ga at all, the barrel is 1.20", checkered syn forend is 1.30" wide, wood forends use a different spacer on the 12ga USH, there's no spacer on the synthetic forend, so the ears that fit against the frame are going to be real thin, same for the sides of the forend after it's hogged out. Dunno about the 20ga USH, don't have one, if it uses the regular spacer, it should work.

Tim