« previous next »
Pages: [1]   Go Down

Author Topic: Ruger 10/22 Break-Down Guide Needed  (Read 1804 times)

0 Members and 1 Guest are viewing this topic.

Offline savageT

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1594
Ruger 10/22 Break-Down Guide Needed
« on: January 01, 2003, 07:34:14 AM »
Anyone know a source for a Ruger 10/22 standard Break-Down Guide for cleaning and repairs?  I have a slide release that's hanging up also (right from the factory).  Can you help me to figure out the problem and fix? TIA.


savageT
Logged
savageT........Have you hugged a '99 lately?

Of all the things I've lost in my life, I miss my mind the most.

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
10-22 guide
« Reply #1 on: January 01, 2003, 08:03:26 AM »
savage t Steves page 7a I believe it was had a breakdown of the ruger 10-22 I have it on my favorites list but dont know enough about these things to transfer it to you.  Go back to the old forum and get the address of Stevce off the reloading forum if you can and maybe you can get it from there hope that helps. :D   JIM
Logged

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
10-22 breakdown
« Reply #2 on: January 01, 2003, 08:12:36 AM »
savage T try this  http//stevespages.com/page7a.htm  good luck :D   JIM
Logged

Offline savageT

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1594
Re: 10-22 breakdown
« Reply #3 on: January 01, 2003, 08:37:35 AM »
Quote from: jhm
savage T try this  http//stevespages.com/page7a.htm  good luck :D   JIM


Thanks Jim....Downloaded the print!

savageT
Logged
savageT........Have you hugged a '99 lately?

Of all the things I've lost in my life, I miss my mind the most.

Offline Plainsman

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 302
  • Gender: Male
1st 10/22??
« Reply #4 on: January 01, 2003, 03:57:21 PM »
SAVAGET: Is this your first 10/22? If not, please ignore this if you already know it.

The slide release is MEANT to be released by hand.  It will not release on it's own by pulling the charging handle back.  It is a TWO HANDED affair to begin with.

They designed it with an upside down V to ride on.  You can buy a replacesment stop or simply take and make that upside down V into a TRIANGLE.

There are sights with pics of the mechanism.  I'd try asking at http://www.rimfirecentral.com or http://www.rugerforum.com/cgi-bin/cgiwrap/rugerforum/Ultimate.cgi?action=intro

Good luck!
Logged
Plainsman :)

plainsmanscabin@yahoo.com

"Aim small, miss small!"

Offline savageT

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1594
Ruger 10/22 Break-Down Guide Needed
« Reply #5 on: January 01, 2003, 04:22:11 PM »
Plainsman,

Thanks.  I did know that you have to pull the slide back, then push sortof up and back on the release.  Trouble is, I try and try and when I'm 'bout ready to heave it.....it releases!?????I've got the damn thing in the gunsmith waiting for him to work on it.



savageT
Logged
savageT........Have you hugged a '99 lately?

Of all the things I've lost in my life, I miss my mind the most.
Pages: [1]   Go Up
« previous next »