« previous next »
Pages: 1 [2]   Go Down

Author Topic: sent barrel off for conversion  (Read 3978 times)

0 Members and 3 Guests are viewing this topic.

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: sent barrel off for conversion
« Reply #30 on: February 22, 2012, 08:53:45 AM »
Jason,

Did you have to supply the Savage breech plug to SMI?  If so, can you give me a name or address, where I can pick the Savage breech plug, and a rough idea what it cost?  I am looking to do a conversion.  Thanks.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: sent barrel off for conversion
« Reply #31 on: February 22, 2012, 12:00:05 PM »
OSR,
 
Link below to a 10ML breech plug and you will also need to buy the vent liners.  I read that you can call Savage Firearms Customer service and buy the plug and liners directly from Savage. Also, if you search for "randy wakeman savage smokeless MZ" I believe that Randy Wakeman also sells these plugs.
 
GG
 
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=275006099
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: sent barrel off for conversion
« Reply #32 on: February 22, 2012, 04:42:50 PM »
BB,

Slufoot just gave me the contact info for ASG LLC.   I have an order in for one already.  As always thank you for the information.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: sent barrel off for conversion
« Reply #33 on: February 22, 2012, 06:08:36 PM »
OSR,
 
Good deal and good luck with your smokeless MZ.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: sent barrel off for conversion
« Reply #34 on: February 23, 2012, 12:03:57 AM »
They supplied the plug,is the plug i got one for the savage?
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: sent barrel off for conversion
« Reply #35 on: February 23, 2012, 12:05:46 AM »
I just looked at the one on gunbroker mine dont look like that one
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: sent barrel off for conversion
« Reply #36 on: February 23, 2012, 05:01:52 AM »
You should check with SMI to see what make breech plug they used.  There is the possibility they used the older style Savage BP, or the used a breech plug which was made "in-house".  According to the description on Gun Broker, it is the: "Newer style breech plug for the Savage Muzzle Loader.  Removable with a 3/8" socket.".

I know you were having some problems with IMR 4198 in your conversion, did you finally get it shooting right? 
Sounds like the bore isn't tight enough.

Quote from: Slufoot on February 08, 2012, 08:42:38 AM
Get some harvester sabots, part #H4540B and use with Hornady .400", 200 grain XTP bullets. If your bore is tight enough you will get good results with H-4198, if it's not tight enough the powder will not ignite and the 209 primer will blow the load out the barrel a few feet.
If you experience this get some Accurate 5744 and you will never have any trouble with ignition. I always recommend the 5744 because I know it will be trouble free, you won't get as much velocity but the deer will never know the difference. ;)
 
Stay safe and always use a sabot.
 
GOOD SHOOTING!
Slufoot
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: sent barrel off for conversion
« Reply #37 on: February 23, 2012, 04:15:01 PM »
I am gonna try some 3031 next and some heavier cast bullets next that BB sent me to try and see how rhat works this weekend
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: sent barrel off for conversion
« Reply #38 on: February 25, 2012, 09:52:47 AM »
just ordered a 260 grain rifle mold and a 401 sizer,midway says up to sixty days to get it.
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline muznut 54

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 709
  • Gender: Male
Re: sent barrel off for conversion
« Reply #39 on: May 31, 2012, 10:25:22 AM »
Jason what ever you do don't use Trail Boss even though its bulky its a very fast burning powder like TiteGroup and pressures really spike when compressed. For the 4198 to work good with the 200gr bullet you need to be up around 56 to 62gr. And you can make a smokeless muzzleloader with an SW500 barrel, you would have to get a custom sizer and size down .500 bullets to around .492 depending on your nominal bore size.
Logged
Pages: 1 [2]   Go Up
« previous next »