« previous next »
Pages: [1]   Go Down

Author Topic: Forend mounting lug sheered off 12ga barrel...have a question.  (Read 697 times)

0 Members and 2 Guests are viewing this topic.

Offline nhecht25

  • Trade Count: (6)
  • Member
  • *
  • Posts: 47
Forend mounting lug sheered off 12ga barrel...have a question.
« on: June 10, 2012, 11:44:05 PM »
Hey guys,


Yesterday the forend mounting lug sheered off while shooting my Topper 12 ga barrel.  I'm wondering what/if anything can be done to repair this.  I've thought that perhaps TIG welding might work since it doesn't get as hot as other types of welding.  I know I can get another barrel but I'd like to salvage this one if possible.  Thanks for your thoughts.


Nathan
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #1 on: June 11, 2012, 01:31:05 AM »
Being its a shotgun barrel you could MIG or TIG it back on.

Yes TIG is preferred for firearms but it's NOT lower temp. Just better controlled.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #2 on: June 11, 2012, 04:13:48 AM »
You always may have the option of returning it to H&R for repair also.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline nhecht25

  • Trade Count: (6)
  • Member
  • *
  • Posts: 47
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #3 on: June 11, 2012, 10:09:30 AM »
Thanks guys, I appreciate the feedback.  There's a welding shop close by so I'll ask what they would charge to do it.  I only paid $50 for the barrel so I don't want to sink too much into it. 
Logged

Offline JoseBob

  • Trade Count: (16)
  • Member
  • *
  • Posts: 98
  • Gender: Male
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #4 on: June 11, 2012, 12:13:47 PM »
Haven't had a Handi shear off, but the snap on hook type latch on an old Stevens 16 ga. popped off.  I took it to a welding shop and 5 minutes later it was back on and good as new.  I am sure the cooler tig welder will hold it on for ya.  UMMV of course. 
 
Draw a fine bead on em Son!   Bobby
Logged
Draw a fine bead on em Son!

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #5 on: June 12, 2012, 06:06:58 AM »
I broke the foreend stud off my good friend 357 Mag Nickled Plated Handygun II. :o   I had it TIG welded back on and the repair was fine.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline nhecht25

  • Trade Count: (6)
  • Member
  • *
  • Posts: 47
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #6 on: June 12, 2012, 10:04:40 AM »
It's good to hear of the different successes.  Thanks!


Nathan
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #7 on: June 12, 2012, 10:35:06 AM »
Quote from: nhecht25 on June 11, 2012, 10:09:30 AM
Thanks guys, I appreciate the feedback.  There's a welding shop close by so I'll ask what they would charge to do it.  I only paid $50 for the barrel so I don't want to sink too much into it.

Before I welded myself, I would grab a 6pack of good beer and hed down to the muffler shop about closing time... Ask for the manager, show him I needed a small weld and ask if he would allow one of the guys to weld it for me at closing for the beer... Never had one turn me down...

My point, its a very small easy weld, should not be costly.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline nhecht25

  • Trade Count: (6)
  • Member
  • *
  • Posts: 47
Re: Forend mounting lug sheered off 12ga barrel...have a question.
« Reply #8 on: June 12, 2012, 01:38:05 PM »
Thanks CW, I think I'll give it a shot!
Logged
Pages: [1]   Go Up
« previous next »