« previous next »
Pages: [1]   Go Down

Author Topic: Reaming an ultra slugger  (Read 1283 times)

0 Members and 1 Guest are viewing this topic.

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Reaming an ultra slugger
« on: May 13, 2012, 06:10:03 PM »
Can i ream out an ultra slugger to 3 1/2" safely?
Logged

Offline r29l20

  • GBO Supporter
  • Trade Count: (26)
  • A Real Regular
  • *****
  • Posts: 570
  • Gender: Male
Re: Reaming an ultra slugger
« Reply #1 on: May 14, 2012, 02:08:12 PM »
Yes.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Reaming an ultra slugger
« Reply #2 on: May 14, 2012, 03:01:54 PM »
Should be fine as the USH barrel is a 12 ga bore in a 10 ga barrel blank and the 10 ga chamber is 3.5"   There is a commercially available sabot in 12 ga 3.5" but the brand name escapes me, but you probably already knew that based on your question.  Good luck with your project.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Re: Reaming an ultra slugger
« Reply #3 on: May 14, 2012, 03:38:44 PM »
Thank you guys so much for the replies!

Yes i do, the brand is Lightfield.

If anyone has more feedback please post.

Thanks
Logged

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: Reaming an ultra slugger
« Reply #4 on: May 18, 2012, 04:26:02 PM »
Why?
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Reaming an ultra slugger
« Reply #5 on: May 18, 2012, 06:53:46 PM »
Quote from: spikehorn on May 18, 2012, 04:26:02 PM
Why?

I suspect that same reason that one of my BCs is a 45-120. ;D
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Re: Reaming an ultra slugger
« Reply #6 on: May 19, 2012, 03:30:56 AM »
Partly for fun, and partly for an extremely big hunting gun  :) 
Logged

Offline jeepmann1948

  • GBO Supporter
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 1422
  • Gender: Male
  • San Angelo, Texas
Re: Reaming an ultra slugger
« Reply #7 on: May 20, 2012, 09:46:49 AM »
Reaming to 3 1/2 is like riding a Harley, you can get killed just as dead on a moped,but the Harley sounds better ;D
Logged
"it ain't what you shoot em with......................
  it's where you hit em "

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Re: Reaming an ultra slugger
« Reply #8 on: May 20, 2012, 02:37:42 PM »
Hahaha ..well said!
Logged

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Re: Reaming an ultra slugger
« Reply #9 on: May 21, 2012, 01:17:18 PM »
What is an average price for one of these? Specifically the deluxe( laminated stock WITHOUT thumbhole). I'm guessing $280-$300?


Thanks
Logged

Offline jkpq45

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 278
Re: Reaming an ultra slugger
« Reply #10 on: June 06, 2012, 03:06:14 AM »
Look up Mr. Ed Hubel (Hubel458) on some of the other forums.  He's done this to a 12ga USH and is getting almost 6,000 lbf energy from his loads out of the 24" rifled barrel!
Logged

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Re: Reaming an ultra slugger
« Reply #11 on: June 06, 2012, 03:26:15 AM »
I looked him up a while back. Some of his brass loads are 10,000 ft/lbs of energy.
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Reaming an ultra slugger
« Reply #12 on: June 12, 2012, 06:30:20 AM »
KOBE gun : Kills On Both Ends......
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline jkpq45

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 278
Re: Reaming an ultra slugger
« Reply #13 on: June 12, 2012, 06:34:15 AM »
Quote from: gcrank1 on June 12, 2012, 06:30:20 AM
KOBE gun : Kills On Both Ends......

Not due to firearm malfunction, certainly.  But I would imagine the recoil would wake you up!  Mr. Hubel has some of his long guns weighted upwards of 17 pounds to help tame the pounding.
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Reaming an ultra slugger
« Reply #14 on: June 12, 2012, 08:24:01 AM »
Yeah, its a figure of speech, but detached retinas, dislocated shoulders, whiplash neck injury, etc. are real, and can last the rest of your life. Cracked stock wrists and pounded underlugs are cheap compared. Just sayin' dont enter into this lightly.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline jeepmann1948

  • GBO Supporter
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 1422
  • Gender: Male
  • San Angelo, Texas
Re: Reaming an ultra slugger
« Reply #15 on: June 17, 2012, 03:53:25 AM »
I have a 12ga USH that if using standard 3" slugs won't take it down I am going to call in the close air support from the Marines  ;D
Logged
"it ain't what you shoot em with......................
  it's where you hit em "

Offline DeerSlayer777

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 113
Re: Reaming an ultra slugger
« Reply #16 on: June 17, 2012, 08:02:06 AM »
I punched in the Dixie DGS load on a thornily relative stopping power scale and it scored a 465 and for elephant he recommends a 250. So with solid bullets, no elephant is safe from my .73 cal rifle.  Mr. Huble's loads probably could take out 60 or 70 elephant in one shot :)
Logged
Pages: [1]   Go Up
« previous next »