« previous next »
Pages: [1]   Go Down

Author Topic: Homemade cleaning solution for black powder  (Read 3067 times)

0 Members and 1 Guest are viewing this topic.

Offline slipshod

  • Trade Count: (5)
  • Member
  • *
  • Posts: 41
Homemade cleaning solution for black powder
« on: January 01, 2006, 01:27:30 AM »
Does anyone have a recipe for a cleaning solution for black powder?Slipshod
Logged

Offline kb

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 336
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #1 on: January 01, 2006, 02:25:38 AM »
Hot soapy water....
Logged
If electricity comes from electrons, does morality come from morons?

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
Homemade cleaning solution for black powder
« Reply #2 on: January 01, 2006, 06:27:42 AM »
Yep, after the range or hunting(if fired) I take the barrel off of my T/C Hawken, and emmerse it in a bathtub full of hot soapy water for about a half hour, then I swish is around very well and then rinse in hot clear water, this gets alot out. Then I blowdry it very well to dry it quickly without rust. Then I use patches with T/C $13 until clean. Finish with a patch of Bore Butter for storage. Works well. Jack.
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #3 on: January 01, 2006, 11:45:21 AM »
Windex with vinegar in the clear bottle works great for me.  :D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Oldsnow

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 118
Homemade cleaning solution for black powder
« Reply #4 on: January 01, 2006, 04:30:01 PM »
I have been cleaning smoke poles for 30 years. the best thing I have found is, Isoproply Alcohol. It cleans well and also removes moisture.
I use it between shots a the range and and to clean my M/L at home.
Logged
Thats all she wrote.

Offline Skillet

  • Trade Count: (1)
  • Member
  • *
  • Posts: 79
I like ammonia in soapy water...
« Reply #5 on: January 02, 2006, 09:13:09 AM »
Buy bottles of the stuff at "Dollar Stores"... you can see the crud just fall off in chunks and flakes when you soak your parts in it.

Skillet
Logged

Offline cattleskinner

  • GBO Supporter
  • Trade Count: (9)
  • Contributor
  • *****
  • Posts: 448
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #6 on: January 02, 2006, 10:35:46 AM »
I spray everything real well with windex, and then fill the sink full of hot soapy water, and using a tight patch on a shotgun cleaning rod, pull the water up and down the barrel.  Switch to a brush, run it up and down a few times, back to the patch for a few more swabs, then just rinse it off in the tub with hot water.  Run a patch of 99% rubbing alcohol down the barrel to dry the water, oil and put away.

~~~Amos
Logged
"You can't miss fast enough to win a gunfight"

Offline deernutt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
easy cleaning
« Reply #7 on: January 06, 2006, 07:09:32 PM »
blue windex quick and easy
Logged

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #8 on: January 07, 2006, 05:40:40 AM »
Over the years I've tried A to Z.  My entire cleaning kit consists of a bottle of rubbing alcohol and a can of Ballistol...Period.   :grin: , Walt
Logged

Offline srwshooter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
Homemade cleaning solution for black powder
« Reply #9 on: January 09, 2006, 02:30:48 AM »
i use amsoil powerfoam ,its made to remove carbon in engines . just spray and wipe.
Logged

Offline Possumcop

  • GBO Supporter
  • Trade Count: (14)
  • Member
  • *****
  • Posts: 81
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #10 on: January 10, 2006, 03:57:46 PM »
I use windshield washer solvent from Wall World.  Works great for me!!
Logged
"Be who you are, say what you think, people that matter don't care, and
people that care don't matter." -- Dr. Seuss

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #11 on: January 10, 2006, 04:37:56 PM »
Quote from: possumcop
I use windshield washer solvent from Wall World.  Works great for me!!


Be careful, it contains Ammonia and that is corrosive.  :D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: easy cleaning
« Reply #12 on: January 10, 2006, 04:39:59 PM »
Quote from: deernutt
blue windex quick and easy


Be careful, it contains Ammonia and that is corrosive.  :eek:
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline gdog

  • Trade Count: (3)
  • Member
  • *
  • Posts: 63
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #13 on: January 22, 2006, 12:20:48 PM »
Three parts of rubbing alcohol, three parts hydrogen peroxide and two parts Murphy's oil soap. Not my recipe, can't remember where I got it or I would give the credit due.
Logged
John 3:16

Gordon

Offline dmills

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
Homemade cleaning solution for black powder
« Reply #14 on: January 23, 2006, 12:38:28 PM »
Quote from: gdog
Three parts of rubbing alcohol, three parts hydrogen peroxide and two parts Murphy's oil soap. Not my recipe, can't remember where I got it or I would give the credit due.


I like the alcohol and HP.  I am not too hot on the Murphy Oil Soap.  It is too sudsy.  

I saw an ad last night for Oxy-Clean.  Anyone tried that?  It goes on in powder and then foams up when water is added.
Logged

Offline slave

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
  • Gender: Male
Homemade cleaning solution for black powder
« Reply #15 on: January 26, 2006, 03:43:22 PM »
I like warm soap & water and  then a clean water rinse chased with a few dry patches. One or two Alcohol soaked patches to help remove any water that may be left and a good coat of otis.

Anything that has a safe ph and is a solvent to salt should clean a ml fast. Water is as cheap as it gets.
Logged
keep your powder dry !!!

Offline Inthewoods

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Homemade cleaning solution for black powder
« Reply #16 on: January 27, 2006, 01:44:53 PM »
Quote from: gdog
Three parts of rubbing alcohol, three parts hydrogen peroxide and two parts Murphy's oil soap. Not my recipe, can't remember where I got it or I would give the credit due.



The correct recipe is, 2 parts isoproply alcohol (rubbing alcohol 70%. Walmart has it).....2 parts hydrogen peroxide......1 part Murphy's Oil Soap. Stirred not shaken :wink: . Store in a dark container.

I have used this for YEARS and it is in MHO, the best thing going. Here is HOW i use it....

Dry brush bore with a nylon brush, dump out soot.

Block off nipple and pour barrel full, leave a half inch low at muzzle.

Stand rifle in corner for 30 minutes...it will foam up a little.

Pour out cleaner then brush vigorously while barrel is still wet.

Push wet patches through until no discoloration shows.

Wet/dry patches with CARBURATOR CLEANER to finish clean.

Oil bore with 3 in 1 oil.

I have polished bores that stay mirror finished with this system and on any given day my rifles will shoot clover leaf groups to 100 yards. Hope this helps....

P.S. the wife don't like the smell of carb cleaner but I do....I have a shop to clean my rifles in.
Logged
gun control is good: Proper cheek weld, Slow exhale and a Steady trigger pull.....

Stay The Course For Our Freedom!

Its been all uphill to 40 sumthin...almost lookin' forward to the downhill slide......

Offline LTHaynes

  • Trade Count: (0)
  • Posts: 1
Re: Homemade cleaning solution for black powder
« Reply #17 on: October 01, 2012, 10:08:14 AM »
Quote from: dmills on January 23, 2006, 12:38:28 PM
Quote from: gdog
Three parts of rubbing alcohol, three parts hydrogen peroxide and two parts Murphy's oil soap. Not my recipe, can't remember where I got it or I would give the credit due.

I like the alcohol and HP.  I am not too hot on the Murphy Oil Soap.  It is too sudsy. 

I saw an ad last night for Oxy-Clean.  Anyone tried that?  It goes on in powder and then foams up when water is added.

Members of my reenactment unit use this recipe and it works great. The chemical reaction keeps the suds down and the Murphy's keeps the gun oiled. Great recipe
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: Homemade cleaning solution for black powder
« Reply #18 on: October 01, 2012, 02:53:08 PM »
Dihydrogen Monoxide. Dry, oil with Ballistol.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
Re: Homemade cleaning solution for black powder
« Reply #19 on: October 01, 2012, 03:14:41 PM »
Quote from: kb on January 01, 2006, 02:25:38 AM
Hot soapy water....

yeah what he said!
Logged

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
Re: Homemade cleaning solution for black powder
« Reply #20 on: October 01, 2012, 03:34:08 PM »
i only clean mine with hot soapy water, its handy and dont have to buy nuttin. dry them good and oil with whatever oil yu have on hand.30 wt or marvel or bore butter.what have yu.aint had no problems with rust yet.just dry out the bore good afore yu shoot and yu be fine.
Logged

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Homemade cleaning solution for black powder
« Reply #21 on: October 01, 2012, 04:57:37 PM »
Quote from: hillbill on October 01, 2012, 03:34:08 PM
i only clean mine with hot soapy water, its handy and dont have to buy nuttin. dry them good and oil with whatever oil yu have on hand.30 wt or marvel or bore butter.what have yu.aint had no problems with rust yet.just dry out the bore good afore yu shoot and yu be fine.
Hot soapy water is the best, make sure it's boiling hot soapy water.  Hot water from the sink just doesn't cut it.  Can lead to rusting. :P

I would be careful using the bore butter.  Make sure the bore is completely dry before you use it.  Otherwise....... :P
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline srussell

  • GBO Supporter
  • Trade Count: (14)
  • A Real Regular
  • *****
  • Posts: 838
Re: Homemade cleaning solution for black powder
« Reply #22 on: October 01, 2012, 07:38:46 PM »
hot water will work fine. even cold water will work. if using cold water make sure you get the barrel dry
Logged
Pages: [1]   Go Up
« previous next »