« previous next »
Pages: [1]   Go Down

Author Topic: Need some advice on a project  (Read 433 times)

0 Members and 2 Guests are viewing this topic.

Offline phsarge

  • Trade Count: (2)
  • Member
  • *
  • Posts: 27
Need some advice on a project
« on: September 11, 2012, 04:47:29 PM »
Ok so I got an idea. I am trying to build a switch barrel lever action. I am interested in taking a Rossi 410 lever action shotgun and setting it up to shoot shoot with a second barrel setup the 460 s&w. looking for some help has anyone got any ideas on this as this is the strangest one I have done. I am going to base this off of the old take down lever actions. Any ideas would be appreciated.
Jeff
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Need some advice on a project
« Reply #1 on: September 11, 2012, 05:46:13 PM »
The biggest hurdle will be getting the vastly different length rounds to feed.. The is also a great difference in pressures generated.. so firing pin will likely have to be bushed to a smaller diameter.
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: Need some advice on a project
« Reply #2 on: September 13, 2012, 11:59:10 AM »
That might get dangerious fast. The max presure on a 410 is abt 14,000 psi. The max presure on a 460 is 60,000 psi. I do not think that an action made for a shotgun would hold up to that kind of presure. I went the other way. I built a 410 slug gun on a Moslin action.
Logged
Pages: [1]   Go Up
« previous next »