« previous next »
Pages: [1]   Go Down

Author Topic: forcing cone  (Read 557 times)

0 Members and 1 Guest are viewing this topic.

Offline bearbeater

  • Trade Count: (0)
  • Member
  • *
  • Posts: 96
  • Gender: Male
forcing cone
« on: September 13, 2012, 01:41:44 PM »
Want to removeforcing cone in my ush 20 have anyone done this themselves and what results have you noticed
Thanks
BB
Logged
Thats the ups and downs of Aviation

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 923
  • Gender: Male
  • Retired and livin the dream !
Re: forcing cone
« Reply #1 on: September 14, 2012, 02:01:06 AM »
  Need more information about what you are trying to acccomplish. Whats the problem with it the way it is now ?   A reamer will remove it but Why?
  Jedman
Logged
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,

Offline bearbeater

  • Trade Count: (0)
  • Member
  • *
  • Posts: 96
  • Gender: Male
Re: forcing cone
« Reply #2 on: September 14, 2012, 02:35:45 PM »
Hey Jed
I have made a mold for a paperpatch Sabot an do not want the forcing cone
Bearbeater
Logged
Thats the ups and downs of Aviation

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 923
  • Gender: Male
  • Retired and livin the dream !
Re: forcing cone
« Reply #3 on: September 17, 2012, 07:05:22 AM »
  I guess the problem I see with this is whatever forcing cone it does have means the rifling has already been removed ( tapered ) and no way to put it back.   If you reamed it out to a straight diameter a few thousands larger than your patched slug I dont see what you will gain ?  I might not be following what you wanted to do.
    Jed
Logged
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,

Offline keith44

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2748
  • Gender: Male
Re: forcing cone
« Reply #4 on: September 17, 2012, 07:22:50 AM »
The forcing cone helps align the projectile squarely into the bore (called the throat or leade in rifles)  Totally removing it would require boring the entire barrel, lengthening it in smooth bores lowers pressures and can help improve patterns.  Slug barrels?? not sure what would happen.  If you are having issues with the paper jacket stripping at the leade try "ironing" the patch to the projectile and applying a small amount of lube to the paper jacket. (assuming you have a sizing die or can make one)


Otherwise I have no clue what you are doing.
Logged
keep em talkin' while I reload
Life member NRA
Pages: [1]   Go Up
« previous next »