Author Topic: THIS FORUM  (Read 4914 times)

0 Members and 2 Guests are viewing this topic.

Offline Mike in Virginia

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1551
Re: THIS FORUM
« Reply #30 on: February 01, 2013, 03:46:54 AM »
I dreamed about a Model 28 last night.  By far, the most practical revolver ever made.  Armed with a 28, a man is ready for anything.  I'd trade most any gun I have now for a 28.   

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: THIS FORUM
« Reply #31 on: February 01, 2013, 01:14:54 PM »
I dreamed about a Model 28 last night.  By far, the most practical revolver ever made.  Armed with a 28, a man is ready for anything.  I'd trade most any gun I have now for a 28.
Contact my Uncle he has mine and is looking for a 1911.

Offline Dixiejack

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 402
  • Gender: Male
Re: THIS FORUM
« Reply #32 on: February 04, 2013, 01:56:20 PM »
Mike, the Model 28 has been one of the best .357's S&W ever made. I posted about one that I bought from a friend of mine.  He was a GSP (Georgia State Patrolman) and the Model 28 was the standard service weapon back in the 60's and 70's. He had the barrel cut back to 5" to give it better balance and it did. I have one on my bucket list and will have the barrel cut back like the other one. Good luck finding one.

Offline williamlayton

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 15415
Re: THIS FORUM
« Reply #33 on: February 05, 2013, 09:05:50 AM »
I have three but they are at the hospital for surgery.
28's are not hard to find and they take cosmetic surgery well.
Blessings
TEXAS, by GOD

Offline scootrd

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2745
Re: THIS FORUM
« Reply #34 on: February 05, 2013, 09:53:58 AM »
have never been a S&W fanatic.. However if you pinned me down , for the life of me I dont think I could explain why exactly I am not. I only have one revolver now (sold all my others).  An older Ruger Security-Six. It Functions as my go to night stand revolver. I like the solid construction,  heft and balance,  and trigger pull is not too bad. (perhaps a little heavy).

I miss my Bearcat.
"if your old flathead doesn't leak you are out of oil"
"I have strong feelings about gun control. If there is a gun around I want to be controlling it." - Clint Eastwood
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote." - Benjaman Franklin
"It's better to be hated for who you are , then loved for who your not." - Van Zant

Offline Oldshooter

  • GBO subscriber and supporter
  • Moderators
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 6426
Re: THIS FORUM
« Reply #35 on: February 05, 2013, 03:28:35 PM »
Lots of folks I know were buying Taurus judges. I have always been partial to Smiths so I found a governor and bought it out of meanness I guess. Then I shot the thing and I really like it. It patterns better than the judges I've shot and it just feels better in my hand. So now I'm not partial to smiths I am danged prejudiced towards them  8)  !




Modified to correct a fat finger spelling error 
“Owning a handgun doesn’t make you armed any more than owning a guitar makes you a musician.”

"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

Offline oldhunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
  • Gender: Male
Re: THIS FORUM
« Reply #36 on: February 08, 2013, 12:28:35 AM »
Only own 3 S&W handguns, 1 pistol a model 22A and 2 revolvers.  My favorite handgun is my model 696, .44 special that is often my carry gun during cold weather that extends from Oct. thru March here in western NY.  A few years ago I inherited a S&W K-22 Masterpiece .22 revolver with 6" blued barrel.  A first glance it looked like it had been stored at the bottom of a tool box with numerous scratchs, too much rust and just the general appearance of a beat up old paperweight.  After setting in the original box in my safe for a several years, I finally took it to the range one day just to see how it fired.  This is a very fine shooter as the bore remains bright with no damage to the crown.  If I were to use this in league matches, it would hold its own quite nicely.

Offline 3030guy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 113
  • Gender: Male
Re: THIS FORUM
« Reply #37 on: February 09, 2013, 05:59:40 AM »
I have Smiths, and love 'em. I don't reply much on here because I don't know much about them, but this is certainly a good place to learn. It's one of the discussion groups I consistently read.

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: THIS FORUM
« Reply #38 on: February 09, 2013, 06:04:56 AM »
Only own 3 S&W handguns, 1 pistol a model 22A and 2 revolvers.  My favorite handgun is my model 696, .44 special that is often my carry gun during cold weather that extends from Oct. thru March here in western NY.  A few years ago I inherited a S&W K-22 Masterpiece .22 revolver with 6" blued barrel.  A first glance it looked like it had been stored at the bottom of a tool box with numerous scratchs, too much rust and just the general appearance of a beat up old paperweight.  After setting in the original box in my safe for a several years, I finally took it to the range one day just to see how it fired.  This is a very fine shooter as the bore remains bright with no damage to the crown.  If I were to use this in league matches, it would hold its own quite nicely.
I had a Model 17 with a 4" barrel that I purchased from a Range the barrel had a bulge in it.  Even with the barrel bulge it was a tack driver.  I never shoudl have sold that gun.   

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: THIS FORUM
« Reply #39 on: February 13, 2013, 02:51:08 PM »

The next in line is the 22A that for some reason only likes CCI Stingers @ $10 a box , but it does shoot them VERY well , so I can't complain too much .
 
stimpy
I loved my 22A before I dropped it in the river ;) , I never fired a stinger in it.  I tried a couple of bulk ammos and had stovepipes until I found federal auto match and it never hiccuped after that.
I guess it was accurate, I tremble so bad that I couldn't tell.
I asked S&W about this very topic and was told to use CCI mini mags in my 22A-1? Have, with great success.
Steve
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: THIS FORUM
« Reply #40 on: February 13, 2013, 05:39:43 PM »
I have three but they are at the hospital for surgery.
28's are not hard to find and they take cosmetic surgery well.
Blessings
They are getting harder to find, as William keeps buying them and modifying them.  :D

Offline williamlayton

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 15415
Re: THIS FORUM
« Reply #41 on: February 14, 2013, 03:37:09 AM »
Does that make me a bad person----you can carry this entitledment stuff just too far.  :D
Blessings
TEXAS, by GOD

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: THIS FORUM
« Reply #42 on: February 14, 2013, 03:54:14 AM »
Does that make me a bad person----you can carry this entitledment stuff just too far.  :D
Blessings
No not at all.  Was just a jab. 
It is your gun and your money and you spend it how you want and modify away you want.
I have done some things with different guns that would make a purest cringe.  Hacking, modifying, and painting.

Offline williamlayton

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 15415
Re: THIS FORUM
« Reply #43 on: February 14, 2013, 11:41:30 PM »
Pureist ?? Hummmm---If it is purely mine is that not as pure as it can get. If it is someone elses design and thoughts then you are not the pureist, he is and he is the pureist and you own a copy-----see Les Bauer.
Now---if Les is the puriest, I must be my own puriest--to be honest with my own creativity.
Seeing as how I can't/don't do my own work--welllllll  :-[ --I am nothing but a buyer of puriest workmanship.
OH WHOAH is me---I am less than I claim to be and a liar.
Are you calling me a liar--- >:( .
Think about it!  ::)
Blessings
TEXAS, by GOD

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
Re: THIS FORUM
« Reply #44 on: February 15, 2013, 12:19:28 PM »
At S&W they call me a "newbe" ok i'm stilol new to S&W revolvers.
Well i'm new to S&W revolvers mainly because the other manufacturers are constantly discontinuing all the calibers i wanted in revolvers.  Even Taurus is discontinuing there calibers besides colt(handguns) and ruger in calibers/models.  It seems like a mad scramble to get what i want before there gone for good.  I'm into the S&W revolvers in nickel finish when i can get them new.  The grips feel great in my hands too the orginal grips appear to be perfect to me.  Plus there is something about the S&W N Frame balance too.  Overall there made for human hands.

Offline williamlayton

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 15415
Re: THIS FORUM
« Reply #45 on: February 16, 2013, 11:51:04 PM »
The Hen said she was putty in my hands---that was before we married and she was lying thru her teeth.
I do like the target grips above those knuckle busting Magmas.
Blessings
TEXAS, by GOD

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: THIS FORUM
« Reply #46 on: February 17, 2013, 04:01:18 AM »
I do like the target grips above those knuckle busting Magmas.
Blessings
The only way I like my 44 is with the large smooth sided target grips.  The wider grip seems to spread out the recoil in my hand and the "combat" style grips while slim and easy to hide seem to focus that recoil and limits my practice sessions.
I also have smaller hands and need to have the back strap open on the stocks / grips so I can shoot it in double action easier.
But that is why we have so many options of styles and materials.

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
Re: THIS FORUM
« Reply #47 on: February 17, 2013, 09:34:03 AM »
On my new S&W M24 w/6 1/2" barrel in 44special in nickel of course i purchased the larger S&W Combat grips from the S&W store and removed the smaller S&W grips from the m24.  Now she feels like one of the larger N farme magnums.  There much easier to shoot when they all have the same feel and handling except for the recoil.  My S&W revolvers will only see the standard magnum loads and the lighter leadcast reloads i promise.  I don't want to spread the frames.

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: THIS FORUM
« Reply #48 on: February 17, 2013, 01:41:23 PM »
On my new S&W M24 w/6 1/2" barrel in 44special in nickel of course i purchased the larger S&W Combat grips from the S&W store and removed the smaller S&W grips from the m24.  Now she feels like one of the larger N farme magnums.  There much easier to shoot when they all have the same feel and handling except for the recoil.  My S&W revolvers will only see the standard magnum loads and the lighter leadcast reloads i promise.  I don't want to spread the frames.
M24 is a 44 Special.  I would not do magmum loads but warm specials.  you really do not need magsnums, I did it beeacuse I did not know better way back then.  Also it made sence to have the ability to use both specials and mags depending on what I cna find in the stores.

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: THIS FORUM
« Reply #49 on: February 12, 2014, 03:01:16 PM »
I own about 15 S&W double action pistols ranging from .22 LR to .500 S&W and numerious others from Browning to
Walther, so, what would you like to talk about? I guess I'm a revolver junkie.
Steve
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline fast*eddie

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 218
  • Gender: Male
Re: THIS FORUM
« Reply #50 on: February 16, 2014, 11:19:55 AM »
Not everyone has the same interests .
Semper Fi !