Author Topic: 147 gr. rainer plated in 9mm/bluedot data?  (Read 394 times)

0 Members and 1 Guest are viewing this topic.

Offline Gallahad

  • Trade Count: (33)
  • Contributor
  • ***
  • Posts: 492
147 gr. rainer plated in 9mm/bluedot data?
« on: February 02, 2013, 09:46:47 AM »
anybody got load data? have the bullets and some bluedot. shooting a 4"glock 19. please give estimated velocity if you have it also. would really appreciate any info. looking at doing some hardcast loads soon too. (got a lone wolf barrel).

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: 147 gr. rainer plated in 9mm/bluedot data?
« Reply #1 on: February 02, 2013, 11:52:12 AM »
Alliant has a load for the 147g Speer GDHP with Bluedot that should get you well in the ball park , its a MAX of 5.8g and an est . FPS of 1000 , granted the plated pills are not quite as tough as the jacketed yet their close enough to have a working point .
 
stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline Larry L

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 780
Re: 147 gr. rainer plated in 9mm/bluedot data?
« Reply #2 on: February 02, 2013, 05:11:21 PM »
From the Rainier loading manual, a 147gr HP or TRN bullet using Blue Dot powder, OAL at 1.169", WSP primers, Universal receiver.
TRN bullet
Start 5.0grs Blue Dot =757'ps pressure 21,300PSI
Max 6.1grs Blue Dot = 932'ps pressure 26,800PSI

HP bullet
5.0 grs Blue Dot = 740'ps pressure 20,700 PSI
6.1 grs Blue Dot = 960'ps pressure 28,000PSI

SAAMI accepted standard pressure 35,000PSI,
+P loads 38,500PSI