« previous next »
Pages: [1]   Go Down

Author Topic: Another 22 Jet Barrel  (Read 563 times)

0 Members and 1 Guest are viewing this topic.

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Another 22 Jet Barrel
« on: January 26, 2013, 09:16:07 AM »

Another 22 Jet barrel.  I just stumbled on this looking for something else.

http://www.armslist.com/posts/766345/nashua-new-hampshire-rifles-for-sale--h-r-barrels
Logged

Offline cudatruck

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: Another 22 Jet Barrel
« Reply #1 on: January 27, 2013, 11:13:25 AM »
I contacted this guy about the 22 jet, turns out he has a .410 im looking for also. worked out a deal, he is supposed to call me to arrange payment. i want to have the .410 bored to insert a .32 cal barrel to have chambered in .327 federal. the .22 jet i don't know yet.
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Another 22 Jet Barrel
« Reply #2 on: January 28, 2013, 06:03:02 AM »
You 'may' not need to bore the 410, just turn the 'insert barrel' to nicely fit the chamber and rim at the back and undersize for bore most of the rest, with a snug bore riding front end dia. (or for a bigger ga., say a 20, with an O-Ring groove up toward the muzzle. Make that a snug fit inbore with some Vasoline on the O-Ring and it with slide in/out decently)
There are some barrel liners available (Track of the Wolf used to have some) that might be good for something like this. You could fit the rear of the liner into a chamber turned 'plug' to take the breech pressure.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Another 22 Jet Barrel
« Reply #3 on: January 28, 2013, 06:33:24 AM »
Larry made me a 12" 22 Hornet insert for a 12ga that's pretty much what gcrank described, it worked real good, good enough for a ½" group at 50yds. There are pics in the FAQs link, but they're real slow to load right now.

Tim

http://www.gboreloaded.com/forums/index.php/topic,160165.msg1098710803.html#msg1098710803
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline cudatruck

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: Another 22 Jet Barrel
« Reply #4 on: January 30, 2013, 01:14:23 PM »
I'm looking at a permanent liner install. turning the donor .32 barrel down some and boring the .410 to make a nice fit then epoxy them together. will need the extractor notch milled and the proper extractor for the .32. will have to re mark the barrel because it will be cut to 16.25 inches. the rifle barrel crown will be recessed in the shotgun barrel about 1.5 inches. do you guys think some ports or slots in that portion would be advisable? still would need to drill and tap for scope rail. I intend to chamber this for .327 federal, making availble the .32h&R mag, .32s&w long, and .32 s&w.
Logged

Offline cudatruck

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: Another 22 Jet Barrel
« Reply #5 on: January 30, 2013, 01:17:16 PM »
The seller responded to my first email, we negotiated a price, and I sent him my address and phone number to arrange payment. Have not heard from him since. Sent another email today, hopefully he will get back to me. The price we agreed on will make this project alot more feasable. Don't know if i will ever do anything with the Jet.... maybe.
Logged
Pages: [1]   Go Up
« previous next »