Author Topic: reloading 357mag  (Read 591 times)

0 Members and 1 Guest are viewing this topic.

Offline hammerman47

  • Trade Count: (0)
  • Posts: 3
reloading 357mag
« on: January 26, 2013, 07:28:52 AM »
Has anyone tried the hornaday leverevolution 140 gr in their 357mag H&R? What load did you use? Thinking of tring some so any help would be nice.  Thanks  James in Arkansas

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: reloading 357mag
« Reply #1 on: January 26, 2013, 08:00:02 AM »
hammer
 
I've not shot the Hornady 140s because my Handi's seem to like the heavier slugs , one will not shoot anything under 158g and another loves the 180g rifle bullets . I'm not sure if its just the travel time of the longer barrel or what , but lighter bullets just seem to pattern more than group .
 
stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline hammerman47

  • Trade Count: (0)
  • Posts: 3
Re: reloading 357mag
« Reply #2 on: January 26, 2013, 08:56:48 AM »
That maybe the reason I can not get mine to group. I have some 158 jackets with win 296 that I have not tried yet. I tried 158 cast in 38 brass with 3gr of bullseye that shot fair. I loaded them for my pistols to play with. I also shot some 95gr cast with 3gr of bullseye that shot fair. That is a fun load in the pistols for my wife. I will have to buy heavy bullets as I do not have molds for them. Would like to have a good load for deer hunting to 75yds.  James in Arkansas

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: reloading 357mag
« Reply #3 on: January 26, 2013, 09:06:49 AM »
tried the factory loaded l/r because
i couldn't find the component bullets
at the time. (please don't tell anyone
that i bought ammo!)
they did ok at 50 but just ok and not
good at 100.
i like cast 158 and jsp 158 better and
they group better.
the jury is still out on the barnes. i think
it's because of the powder i use.
18 MINUTES.  . . . . . .

Offline twoshooter

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
  • Remember the Starfish......
Re: reloading 357mag
« Reply #4 on: January 28, 2013, 10:27:54 AM »
Not Hornadys, but I use 140 gr Rem HP's, I use 14 gr of 2400. I get about 1 1/8 groups @ 75 yards which is what I sight in for with that gun. No chrony, but think it si about 1650/1700 fps. My grandson killed 3 deer so far with it at 35-65 yards.

1000 years ago Men KNEW the Earth was the center of the Universe.....500 years ago Men KNEW the world was flat....... 15 minutes ago you KNEW man was alone in the universe.... Just IMAGINE what we will know tomorrow !! "K"- from Men in Black.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: reloading 357mag
« Reply #5 on: February 02, 2013, 01:46:54 AM »
Like Stimpy, my .357 Handis never liked lighter bullets.  They're both Maxis, but I load 158 gr. XTPs for the mags and 180 gr. Hornady SSPs for the Maxi.  They shoot MOA if I do my part.  I shoot the lighter ones in .38s, but they're just for plinking and I'm not up tight about accuracy.

Pete
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Re: reloading 357mag
« Reply #6 on: February 02, 2013, 02:38:27 AM »
I didn't get to experiment with my Handi 357 Maxi as much as I hoped to before I had finalize it with 180 SSPB's for deer season.  What I did experiment with mine would shoot 125 XTP 357 Mags very well, about an inch at 50yds.  Put the same bullet in a 38 Spl and it patterned.  The next combo I'm going to try are 158grs platted in the 38 spl.  I'm thinking I'll start midway and move to max with a couple different powders.

I just realized I'm not sure if I saved the recipe for the 125 XTPs in the Mag. :(