Author Topic: BHN 9mm  (Read 484 times)

0 Members and 1 Guest are viewing this topic.

Offline JustShootin

  • GBO Supporter
  • Trade Count: (70)
  • Avid Poster
  • *****
  • Posts: 231
BHN 9mm
« on: February 10, 2013, 05:57:22 AM »
I am going to cast some 9mm 124 gr LRN from a lee mold. I was told that the BHN for 9mm should be at least 20 because of the high pressure. I will not be loading a hot load so do I need that kind of hardness or can I use ww lead? What has experience shown? These will be tumble lubed with Alox.
Thanks
Grant
12ga 18 1/4" barrel = Bedroom gun,    12 w/rifled slug barrel,    .410,    12ga mod barrel only,    .22 Sportster,    .17 HMR Sportster,    .223 Rem,    .22 Hornet,    30/30,    45/70,    .357 Rem Max,    .50 Sidekick.

Offline ButlerFord45

  • Moderators
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1992
  • Gender: Male
Re: BHN 9mm
« Reply #1 on: February 10, 2013, 08:50:55 AM »
No, wheel weight's will be fine.  If you still have concerns, water drop'em when you cast.
 
BF
Butler Ford
He who does not punish evil, commands it to be done.-Leonardo da Vinci
An armed society is a polite society-Robert A. Heinlein
Only the dead have seen the end of war- Plato
Lord, make my words as sweet as honey
tomorrow I may have to eat them- A lady's sweatshirt

Offline JustShootin

  • GBO Supporter
  • Trade Count: (70)
  • Avid Poster
  • *****
  • Posts: 231
Re: BHN 9mm
« Reply #2 on: February 11, 2013, 04:38:48 PM »
Thank You for the reply. I think I will quench and try some. There must not be too many people casting and shooting 9mm.
Grant
12ga 18 1/4" barrel = Bedroom gun,    12 w/rifled slug barrel,    .410,    12ga mod barrel only,    .22 Sportster,    .17 HMR Sportster,    .223 Rem,    .22 Hornet,    30/30,    45/70,    .357 Rem Max,    .50 Sidekick.

Offline Gun Runner

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1140
  • Gender: Male
Re: BHN 9mm
« Reply #3 on: February 11, 2013, 07:30:51 PM »
Have been shooting the lee 124gr cast, wheel weight water quenched bullet for about 15 yrs in my CZ75B  using 3.9 grs of bullseye.

Gun Runner