« previous next »
Pages: [1]   Go Down

Author Topic: 20 gauge rifled barrel question...  (Read 620 times)

0 Members and 1 Guest are viewing this topic.

Offline car2back

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
20 gauge rifled barrel question...
« on: March 27, 2013, 05:40:03 PM »
I am thinking about sending my SB1 reciever to be fit for a 20 gauge rifled slug barrel. Does anyone know if the barrel with rifle sights comes drilled and tapped? I'd like the option to use both open sight and a scope.

Thanks
Logged

Offline brayh92

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 141
  • Gender: Male
Re: 20 gauge rifled barrel question...
« Reply #1 on: March 28, 2013, 02:21:47 AM »
My tracker II is a 2006 model I believe and it is not drilled and tapped I'm pretty sure they don't come that way for the factory. But a gunsmith should be able to do it for you real quick and cheap.
Logged
Handi's: .45-70 Govt, .22-250, Pardner 16 GA, Topper 58 20 Ga shorty, Pardner 410 GA

Offline spruce

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2248
  • Gender: Male
Re: 20 gauge rifled barrel question...
« Reply #2 on: March 28, 2013, 05:42:06 AM »
Quick and cheap are relative terms.  ;D
 
If you can D&T it yourself or have a friend do it then it's cheap.  I think the going rate for most gunsmiths is $15-$20 per hole.  Turn-around time depends on his workload and how carefully he works.  Hopefully on MY gun he would take the time to do it right!
Logged

Offline car2back

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: 20 gauge rifled barrel question...
« Reply #3 on: March 28, 2013, 04:00:41 PM »
thanks for the replies!
Logged
Pages: [1]   Go Up
« previous next »