« previous next »
Pages: [1]   Go Down

Author Topic: what size shaft?  (Read 775 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike in Virginia

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1551
what size shaft?
« on: February 16, 2013, 02:33:01 PM »
Due to shoulder trouble, I'm starting all over.  Gonna get a recurve with a 35lb. draw weight.  Finger release, off the shelf, 28.5" draw length.  What size carbon or aluminum do I want?
Logged

Offline jleem66

  • GBO Supporter
  • Trade Count: (3)
  • Member
  • *****
  • Posts: 53
Re: what size shaft?
« Reply #1 on: March 21, 2013, 04:42:28 PM »
Try Goldtip 15/35 or 35/55. 15/35 will probably work best. May have to adjust point weight for proper flight.
Logged

Offline dougk

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1937
  • Driftwood TEXAS
Re: what size shaft?
« Reply #2 on: March 23, 2013, 01:50:31 PM »
Hi Mike


You might want to look at the Easton guides http://www.eastonarchery.com/selection-charts they will help with the shaft size based on your draw length, lb pull etc.


Doug
Logged

Offline Plenty Coups

  • Trade Count: (0)
  • Member
  • *
  • Posts: 93
  • Gender: Male
    • Plenty Coups Archery
Re: what size shaft?
« Reply #3 on: March 24, 2013, 08:03:55 AM »
Depends on how long you cut the shafts and what weight tips you plan on using.Do you have a good clean release? GT 15/35 or CX Predator 20/40 would be my choice to start with a 125 gr. tip cut to 30" as a starting point. I believe they will be weak in spine if cut longer. You can cut them 1/4" at a time to adjust for spine along with experimenting with tip weight. Let us know the results of what you find and we can go from there.
KT
Kent Tinney
Plenty Coups Archery
Darby,MT
Logged
"Diplomacy is the art of saying nice doggy while finding a rock"- Will Rogers
Pages: [1]   Go Up
« previous next »