« previous next »
Pages: [1]   Go Down

Author Topic: Gen 1 Extractor Tuning and Parts  (Read 362 times)

0 Members and 2 Guests are viewing this topic.

Offline 8uck5nort

  • GBO Supporter
  • Trade Count: (16)
  • A Real Regular
  • *****
  • Posts: 540
  • Gender: Male
  • Trying to improve myself one shot at a time.
Gen 1 Extractor Tuning and Parts
« on: June 01, 2013, 04:30:14 PM »
I got a gen 1 extractor that is not extracting very well. Ejectrator is really loose when barrel is open and fails to grab spent case every time. It does work  I just gotta open and close the barrel once or twice to grab the case, but sometimes the extractor falls away from the case and it slips back in chamber. Is there an illustrated parts break down of the gen 1 extactor and is there parts available? Is there any adjustment procedure to "tighten up" the extractor against the case? I have toyed with the adjustment screw, but to no avail. I don't know if it is worn or just need an adjustment.
Logged
Cartridges for My Entertainment: .22 S,L,LR, .223 Rem, 7x57, 30-06, 8x57, 357 mag/max, 35 Remington/Indiana, 35 Whelen, 44 mag, 445 SM mag. Adding the 6.5x55 swede!

Offline 8uck5nort

  • GBO Supporter
  • Trade Count: (16)
  • A Real Regular
  • *****
  • Posts: 540
  • Gender: Male
  • Trying to improve myself one shot at a time.
Re: Gen 1 Extractor Tuning and Parts
« Reply #1 on: June 02, 2013, 02:08:48 AM »
I have poured through the FAQs. There is an abundance of info on the ejector and gen 2 extractors, but not a schematic or a parts relation picture to show how this generation of extractor was put together. So if someone can post one or point in the right direction that would be awsome. As always thank you for your replies.
Logged
Cartridges for My Entertainment: .22 S,L,LR, .223 Rem, 7x57, 30-06, 8x57, 357 mag/max, 35 Remington/Indiana, 35 Whelen, 44 mag, 445 SM mag. Adding the 6.5x55 swede!

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: Gen 1 Extractor Tuning and Parts
« Reply #2 on: June 02, 2013, 03:01:24 AM »
Sorry partner, I can't help you on the schematic, but is there room to shim the extractor to prevent it "falling away from the case?"
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Gen 1 Extractor Tuning and Parts
« Reply #3 on: June 02, 2013, 03:52:54 AM »
Check with Brian for sure, but I think just removing the set screw and add a factory leaf spring would solve the problem.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »